NSL LED Globe Lights

A flexible marquee string with LED long life technology, ultra low energy consumption, and 200 foot maximum run!

Applications

• Awnings
• Buildings outlines
• Signs
• Theatrical projects
• Merchandising
• Retail windows
• Accents
• Displays

Features

• Safe 12V system
• 0.5 watt 60, 000-hour white LEDs
• Weather resistant plastic globes completely covering LEDs
• Parallel wiring allows loss of an LED to remain independent of remainder of string

NSL LED Globe Lights >

NSL LED MiniDisc Scoop Light

The scoop cover version of NSL's popular LED MiniDisc Light The perfect mini light for outlining and illuminating architectural features located almost anywhere indoors or outdoors. Offered in 5 LED colors and 4 cover colors.

With energy usage a low 0.54 watt per fixture and LED live of 60, 000 hours, LED MiniDisc are UL Listed for all wet, IC, ceiling and direct burial applications. A surprising total of 100 fixtures can be powered from just one 60W Class 2 LED Driver.

Applications

• Steps
• Aisles
• Paths
• Driveways
• Direction Lighting
• Information Lighting
• Decorative Lighting
• Merchandising
• Landscape Accents

Features

• 60, 000 hours LED life
• Low energy requirements 0.54 watts per fixture
• UL listed for in-wall, in-floor, outdoor wet and outdoor burial applications
• Up to 100 fixtures per power supply
• 6 LED colors: Warm White, Cool White, Blue, Green, Red, Amber
• Cover Color Options: Aluminum, Bronze, White and Black
• Fits in any 1" Width hole, 3 1/2" long
• Safe 12 volt, Class 2 power supply (not included)

NSL LED MiniDisc Scoop Lights >

NSL LED Reflective Lights

A medium size wall mounted fixture designed to reflect the brightness of 22 LEDs into a soft diffused illumination for steps, aisles, halls, paths and sidewalks. Offered in 4 LED colors and 2 cover colors. With energy usage a low 2.5 watts per fixture and an average LED life of 60, 000 hours, LED Reflective Light is UL Listed for wet and IC locations. A remarkable total of 250 fixtures can be parallel wired (daisy chained") from one 110VAC tap.

110VAC input and output. Does not require an LED Driver. Up to 250 LED Reflective Lights per 110VAC tap.

Applications

• Interior steps
• Exterior steps
• Aisles
• Halls
• Paths
• Patio lighting
• Entry lighting
• Post lighting

Features

• 60, 000 hours LED life
• 110VAC power input and output
• Low energy requirements 2.5 watts per fixture
• UL listed for wet and IC locations
• Two cover colors: White and Aluminum
• Four LED Color Options: White, Blue, Green and Amber
• Die cast aluminum can and cover
• Fits any housing cutout of 6.5" L x 4.5" H x 3" D

NSL LED Reflective Lights >

Work Station Illuminated with LED Shelf Lighting

Above: Lectern using NSL LED Shelf Lighting
Below: LED Shelf Lighting from NSL

NSL LED Shelf Star

An elegant LED fixture of ultra-thin design and extrememly even illumination

Applications

• Shelves
• Display Cases
• Cabinets
• Consoles
• Podiums and Lecterns
• Decorative Accents
• Work Stations

Features

• 60, 000 hour LED life
• Low energy usage of 2.4W, 4.8W, 7.2W
• UL Listed for surface mounted indoor applications
• Fixture Colors: White, Bronze, Aluminum, Black
• Safe 24 Volt, Class 2 power supply (not included)
• Easy mounting with either double-sided tape or wood screws
• Easy wiring with pre-molded extension cords
• Ultra-slim profile
• Max. fixtures per LED Driver:
  • 18pcs of 6-LED Fixtures
  • 9pcs of 12-LED Fixtures
  • 6pcs of 18-LED Fixtures
    or
    108 total LEDs max. per driver

NSL LED Shelf Star Shelf Lighting >

Eurofase Lighting Vibur Table Lamp 13834

Desk lamp in Graphite finish uses a 120v 4w LED.

Width 38.5" x Height : 15" x Diameter 4.25"
Finish: Graphite
Lamp: 1 x 4w LED 120V

Eurofase Lighting Volta Wall Sconce 13833

13833-015 $171.00
Quantity Discounts Available

Hard wired swing-arm wall sconce in Matte Nickel & Graphite finish uses a 120v 4w LED.

Height: 5" x Diameter: 23.62"
Finish: Matte Nickel & Graphite
Lamp: 1 x 4w LED 120V

Swing Arm Wall Lamps >

Condor Lighting Le-er LED Wall Lamp Z154-SN0

Z154-SN0 Le-er Wall Lamp Satin Nickel List: $296.00
Discounted Price: $226.00

360º adjustable head
Flexible steel arm. Light source is directable in virtually any direction
Rocker switch on wall plate

This item includes a 4" Diameter mounting plate. (Not Shown)
Fixture dimensions: 4" W x 20" H Max Height x 1 ¼" to 16 1/2" Proj.
Light source Diameter is 3"
30 x .073W LED = 2.2W LED 120V

Condor Lighting >

Access 70002 Epiphanie Gooseneck LED Wall Lamp

70002LED  $160.00

70002 Epiphanie Gooseneck LED Wall Lamp
2Lt x 1w Super White
Bulb Type LED
Finish: Bronze, Brushed Steel
H 5.5 L 5 Ext 9
CUL Dry Energy Efficient LED Customize
Supplied with Cord and Plug to convert to a pin-up

Access Epiphanie LED Series >

Access 70006 Epiphanie LED Headboard Light

70006LED  $369.00

70006 Epiphanie LED Headboard Light
1Lt x 24w T-5 HO Fluorescent (Bi-Pin Base) 2Lt x 1w Super WhiteLED
Bulb Type T-5_HO
Finish: Bronze, Brushed Steel
H 4.75 L 24 Ext 3.5-7
CETL Dry ADA

Access Epiphanie LED Series >

Terzani Anastacha Table Lamp

ØM74B H4 A9 Brushed Nickel with Clear $2, 200.00
ØM74B H4 D3 Brushed Nickel with Black $2, 295.00

20.9" x Ø7.5" x Ø13.4"
Shade: 11.8"

Brushed finish nickel-plated finish metal table lamp with black or transparent plexiglass diffusers.

6 X 1.5 watt LEDs

Terzani Anastacha Series >

Dabmar LV52-SS Barbecue Grill LED Light

2-in-1 Mounting
Clamp Mount or Two Heavy Duty Magnets on the Bottom

Transformer 120V to 12V Plug-In V 6VR
3 AAA Alkaline Batteries, Included

Material: Aluminum
Lens: Polycarbonate
Lamp: 16 LED 1.44W 120V

Dimensions: 24" Flexible Arm
Diameter 3"
Clamp Mount 4.5" x 4.5"

Dabmar LV-50-SS Barbecue Area Light

Material: Cast Aluminum
Lens: Clear Heat Resistant Tempered Glass
Finish: Electroplated Stainless Steel
Lamp: MR16 20W [35W MAX.] 12V, included
On-Off Switch

Pre-Wired with UL Listed Direct Burial Wire/Cable
Remote 12V Transformer Not Included

ETL Approved

Dimensions: 29 5/8" including Flexible Arm
Head 5" x 3"
Mount 2 5/8"

Hadco NightLife LED

LED, or Light Emitting Diode, is a diode that is chip-mounted in a reflector cup and held in place by a milled steel frame connected to a pair of electrical wires. When current flows across the junction of the two different materials, light is produced from within the solid crystal chip. Hadco uses bright white LEDs as standard, which are developed by coating a blue LED with a phosphor, and thereby generating a white color.

Hadco Light Emitting Diode LED Landscaping Lights >

Hadco LED fixtures are available in both low voltage and line voltage, and cover applications from accent lighting and path lighting, to step lighting, inground and underwater lighting. We are proud to be the leader in developing outdoor landscape lighting fixtures that are truly viable in the professional market. Look to HADCO for Leading Edge Development.
This is a featured article on LED lighting from www.hadco.com

Download Hadco LED Products White Paper

Textured Architectural Bronze finish Die Cast Aluminum

15731, 15732, 15741, 15742, 15743, 15751, 15752, 15753 LED Light Emitting Diode Accent Lights are available in Textured Architectural Bronze or Textured Black finish on Aluminum Body and Bronzed Brass on Brass Body

Textured Black finish Die Cast Aluminum

Bronzed Brass finish Solid Brass

Kichler LED Accent Lights

A full Collection of accent lights engineered to provide the spread of light needed with the amount of lumen output desired.

Constructed in either long lasting die cast aluminum or solid brass housings, this latest LED series features threaded mounting stems and locking nuts to allow for simple installation.

Kichler also added integral drivers to each fixture, so there is less equipment to buy or bury.

Housing: Die-cast aluminum or die cast brass with clear tempered glass lens and polycarbonate mounting stem and locknut. Die cast aluminum with hard coat anodized and durable powdercoat finish.

Hexagonal housing — 2" hex by 1-1/4" deep. Individual accent light fixtures have 25 feet of #18-2 direct burial lead wires. Multi-packs have 25 feet of #18-2 direct burial lead wire and 12 feet of #18-2 direct burial wire between each fixture.

Orbital stem for directional control, with brass tightening screw.

Finish: Textured Architectural Bronze, Textured Black or Bronzed Brass
Wiring: 24' of usable #18-2, SPT-1-W leads. Cable connector supplied with fixture.
Light Source: Illumination provided by integrated LED chips.
Body Material: Aluminum or Brass

Optional Mounting Accessories
15601 - Surface Mounting Flange
15607 - Tree/Surface Mounting Bracket

Separate driver is NOT required with this series.
Wire to typical low-voltage transformer.

15731, 15732, 15741, 15742, 15743, 15751, 15752, 15753 LED Light Emitting Diode Accent Lights are available in Textured Architectural Bronze or Textured Black finish on Aluminum Body and Bronzed Brass on Brass Body

Ordering Guide

4.5 Watt 10° Spread
15731 AZT - Textured Architectural Bronze, Aluminum
15731 BBR - Bronzed Brass, Brass
15731 BKT - Textured Black, Aluminum

4.5 Watt 35° Spread
15732 AZT - Textured Architectural Bronze, Aluminum
15732 BBR - Bronzed Brass, Brass
15732 BKT - Textured Black, Aluminum

8.5 Watt 10° Spread
15741 AZT - Textured Architectural Bronze, Aluminum
15741 BBR - Bronzed Brass, Brass
15741 BKT - Textured Black, Aluminum

8.5 Watt 35° Spread
15742 AZT - Textured Architectural Bronze, Aluminum
15742 BBR - Bronzed Brass, Brass
15742 BKT - Textured Black, Aluminum

8.5 Watt 60° Spread
15743 AZT - Textured Architectural Bronze, Aluminum
15743 BBR - Bronzed Brass, Brass
15743 BKT - Textured Black, Aluminum

12.4 Watt 10° Spread
15751 AZT - Textured Architectural Bronze, Aluminum
15751 BBR - Bronzed Brass, Brass
15751 BKT - Textured Black, Aluminum

12.4 Watt 35° Spread
15752 AZT - Textured Architectural Bronze, Aluminum
15752 BBR - Bronzed Brass, Brass
15752 BKT - Textured Black, Aluminum

12.4 Watt 60° Spread
15753 AZT - Textured Architectural Bronze, Aluminum
15753 BBR - Bronzed Brass, Brass
15753 BKT - Textured Black, Aluminum

Patent Pending in US & Canada
5 year limited warranty.

More Kichler LED Lights >

NSL Micro LED Light Strip

A flexible light strip designed with 10mm x 10mm square profile to fit perfectly into any NSL mounting extrusion for an elegant finished look to the edge of steps, aisles and awnings. Low voltage Micro LED is offered in 10VDC, five exciting colors and six pre-assembled Lengths. With a low energy usage of 1.2 watts per foot and a 60, 000 hour LED life, low voltage Micro LED is UL Listed for indoor and outdoor applications. A total of 50 feet can be powered from one NSL 60W Class 2 LED Driver.

NSL Micro LED Light Strip >

Colors

NSL LED MiniDisc Light

The perfect mini light for outlining and illuminating architectural features located almost anywhere indoors or outdoors. Offered in 5 LED colors and 4 cover colors.

With energy usage a low 0.54 watt per fixture and LED live of 60, 000 hours, LED MiniDisc are UL Listed for all wet, IC, ceiling and direct burial applications. A surprising total of 100 fixtures can be powered from just one 60W Class 2 LED Driver.

Applications

• Steps
• Aisles
• Paths
• Driveways
• Direction Lighting
• Information Lighting
• Decorative Lighting
• Merchandising
• Landscape Accents

Features

• 60, 000 hours LED life
• Low energy requirements 0.54 watts per fixture
• UL listed for in-wall, in-floor, outdoor wet and outdoor burial applications
• Up to 100 fixtures per power supply
• LED Color Options: White, Blue, Green, Amber and Red
• Cover Color Options: Aluminum, Bronze, White and Black
• Fits in any 1" Width hole, 3 1/2" long
• Safe 12 volt, Class 2 power supply (not included)

NSL LED MiniDisc Lights >

Above: LEDs for Deck Lighting
Below: Trellis Illuminated with LED Surface Star Lighting

NSL LED Surface Star Lighting

A compact surface mounted LED fixture featuring surprising light output and ease of installation.

Applications

• Lighted Handrails
• Lighted Cabinets
• Deck Lighting
• Gazebo Lights
• Trellis Lighting
• Post Lights
• Architectural Accent Lighting
• Landscape LED Lighting
• Lighting for Merchandising

Features

• 60, 000 hour LED life
• Low 1.2W energy usage
• UL Listed for indoor or outdoor application
• 5 LED Colors: White, Green, Blue, Red, Amber
• Fixture Colors: White, Bronze, Aluminum, Black
• Safe 12 Volt, Class 2 power supply (not included)
• Easy surface mount, screws included
• Easy wiring with pre-molded extension cords
• Compact 1.5" Diameter by 1.125" high design
• In-stock, Quick Shipping

NSL LED Surface Star Lighting >

NSL LED Step Light

LED Technology in a die cast aluminum Step Light Fixture, corrosion-proof die cast aluminum design. Available in four colors and three cover styles. All sold only as complete unit, cover and can.

Applications

• Interior steps
• Exterior steps
• Aisles
• Halls
• Paths
• Patio lighting
• Entry lighting
• Post lighting
• Ceilings
• Showers

Features

• Low 6.5 watts per fixture energy usage
• Up to 120 fixtures per 110VAC tap
• UL Listed for wall, IC, ceiling and shower locations
• Three cover designs, Louver, Prism and Scoop
• Four cover color options, White, Bronze, Aluminum and Black
• 60, 000-hour bulb life
• 110V Power Input
• Integral LED Driver in each fixture
• Frosted glass lens
• Die cast aluminum can and cover; suitable for concrete pour
• UL listed for wet location and IC locations
• Frosted glass lens
• 110V push-in connectors included for ease of power input
• Each fixture ships complete with can and cover

NSL LED Step Lights >

NSL LED Brick Lights

LED Technology in a brick-size die cast aluminum Step Light Fixture Use in all applications where a more linear fixture meets design requirements. Available in four colors and three cover styles. All sold only as complete unit, cover and can.

Applications

• Brick walls
• Interior steps
• Exterior steps
• Aisles
• Halls
• Paths
• Patio lighting
• Entry lighting
• Post lighting

Features

• Low 5.0 watts per fixture energy usage
• Up to 150 fixtures per 110VAC tap
• 3 cover designs: Louver, Prism and Scoop
• 4 cover color options: White, Bronze, Black or Aluminum
• 60, 000-hour average LED life
• 110V Power Input
• Integral LED Driver in each fixture
• Die cast aluminum can and cover; suitable for concrete pour
• UL listed for wet and IC locations
• Frosted glass lens
• 110V push-in connectors included for ease of power input
• Each fixture ships complete with can and cover

NSL LED Brick Lights >

Kichler Deck LED 2W Louver Face Brick Landscape Light 15773AZT

Kichler Deck LED 3.8W Louver Face Brick Landscape Light 15773AZT

Designed to be integrated into a brick wall during construction. LED version is also usable in vertical risers. Casts a low, even spread of energy efficient LED light.

No remote driver required to operate these LED fixtures

Finish: Textured Architectural Bronze
Height 4" x Length 4" x Width 9.5"

Housing: Die cast aluminum with a fully sealed heat-resistant glass lens
Wiring: Wire connection must be made inside junction box.
Light Source: Illumination provided by integrated 3.8-Watt LED chips
Voltage: 12
Diffuser Description: Tempered Soda Lime Glass, Frosted on one side
Body Material: Aluminum

UL CSA Listed

Kichler LED Lights >

Kichler Deck LED 2W Glass Lens Brick Landscape Light 15774AZT

Kichler Deck LED 2W Glass Lens Brick Landscape Light 15774AZT

Designed to be integrated into a brick wall during construction. LED version is also usable in vertical risers. Casts a low, even spread of energy efficient LED light.

No remote driver required to operate these LED fixtures

Finish: Textured Architectural Bronze
Height 4" x Length 3.76" x Width 9.5"

Housing: Die cast aluminum with a fully sealed heat-resistant glass lens
Wiring: Wire connection must be made inside junction box.
Light Source: Illumination provided by integrated 3.2-Watt LED chips
Voltage: 12
Diffuser Description: Tempered Soda Lime Glass, Frosted on one side
Body Material: Aluminum

UL CSA Listed

Kichler LED Lights >

Dabmar LV-LED60 Recessed Brick, Step and Wall Light

An excellent durable choice for commercial or residential lighting.

Housing Material: Powder Coated Cast Aluminum
Available Finish: Stainless Steel
Cover Material: Stainless Steel
Lens: Crystal Lens
Pre-Wired with UL Listed Direct Burial Wire/Cable

ETL Approval Pending

Dimensions: 3.25"
Outside Dimension 5.5" x 5.5"
Depth 7/8"

Dabmar LV-LED55 In-Ground Drive-Over Brick Light

An excellent durable choice for commercial or residential lighting.

Material: Rated Drive-Over Glass
Lamp: LED 4W 12V Multi-Color included
Pre-Wired with UL Listed Direct Burial Wire/Cable

ETL Approval Pending

Dimensions: Top 3 5/8"
Outside Dimension 4" x 4"
Height 2 3/8"
Socket 1 1/2"

LVT25 - Transformer with Controller Required, Sold Separately

Dabmar LV-LED60 Recessed Brick, Step and Wall Light

An excellent durable choice for commercial or residential lighting.

Housing Material: Powder Coated Cast Aluminum
Available Finish: Stainless Steel
Cover Material: Stainless Steel
Lens: Crystal Lens
Pre-Wired with UL Listed Direct Burial Wire/Cable

ETL Approval Pending

Dimensions: 3.25"
Outside Dimension 5.5" x 5.5"
Depth 7/8"

Dabmar LV-LED01 Solar LED Road Safety Path and Walkway Light

Perfect for path, walkway, driveway and entrance area lighting. Cast Aluminum Solar LED Road Safety Path and Walkway Lights are an excellent durable choice for commercial or residential lighting.

Material: Cast Aluminum
Lens: Clear Heat Resistant Plastic Lens
Lamp: Solar Powered LED
Available Lamp Color: White

ETL Approval Pending

Available Finish: Grey

Dimensions: Diameter 6" x Height 10"

Remote 12 Volt Transformer Not Included
P-CN-01 Connector Available, Sold Separately

Dabmar D5500 LED 5-Tier Pagoda Light

Perfect for path, walkway, driveway and entrance area lighting. Cast Aluminum Pagoda Lights are an excellent durable choice for commercial or residential lighting.

Material: Powder Coated Cast Aluminum
Lens: Clear Heat Resistant Tempered Glass
Lamp: DL-TB-LED-72/W 72 LEDS 5.8W 120V Lamp, Included

ETL Approved for Wet Location

Available Finish: Black, Bronze, Green or Verde Green

Dimensions: Diameter 6" x Height 10"

P-D5000-10T - 10" Top Adder for D5000-D5200, Sold Separately
P-D5000-3B - 3" Base Adder for D5000-D5200, Sold Separately

Hadco LED Pathlyte (RL4D3)

RL4D3-A LED Horizon Pathlight

Housing: Die-cast aluminum. Stem is extruded aluminum. 1/2 " NPS male threads to screw on to accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. Gasketing is silicone.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Hadco LED Pathlights >

Optical Assembly: Frosted tempered glass lens . Spun aluminum reflector with white thermoset powdercoat.

Lamping: Type 3 Luxeon® high-output LEDs powered at 700mA to operate for 50, 000 hours.

Electrical Assembly: Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Warranty: Three-year limited warranty.

Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.

IP Rating: IP55: Dust-protected and sealed against water jets.

Height: 17 1/4" (435mm)
Width: 10" (253mm)
Max. Weight: 3.18 lb.

Finish: A Black

Hadco LED Pathlyte (CL2D2)

CL2D2-A LED Contemporary Pathlight
CL2D2-H LED Contemporary Pathlight

Housing: Die-cast aluminum. Gasketed twist lock top. Stem is extruded aluminum. 1/2 " NPS male threads to screw on to accessory mounting stake or junction box, sold separately.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Hadco LED Pathlights >

Optical Assembly: Clear tempered flat glass lens.

Lamping: Type 3 Luxeon® high-output LEDs powered at 700mA to operate for 50, 000 hours.

Electrical Assembly: Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 6.2 total watts. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

Warranty: Three-year limited warranty.

Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.

IP Rating: IP66: Dust-tight and sealed against direct jets of water.
Height: 21" (533mm)
Width: 4 3/4" (121mm)
Max. Weight: 2.5 lb.

Finish: A Black, H Bronze

RSC2 Louver Steplyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSC2 Louver Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSC2AK5D3E Louver Steplight with 3 LEDs
RSC2AL5D5E Louver Steplight with 5 LEDs

Select Finish: A Black. B White. H Bronze or N Natural Brass
Select Optics: K5 Symmetric Optics or L5 Symmetric Optics
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Hadco RSC2 Louver Steplyte or Bricklyte >

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.64 lb.

Hadco RSC2

Fasteners are 300 series stainless steel. Gasketing is silicone. Recessed housing contains four (4) 1/2 " NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Integral and furnished as standard on all fixtures. This enables fixture to be used in accordance with NEC Article 680-51 in installations without an external low-water cutoff.

Finish: Zinc-rich primer and thermoset powdercoat for durability. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Optical Assembly: The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels. Reflector is formed from highly reflective aluminum. Symmetric.

Lamping: Type 3 Luxeon® high-output LEDs powered at 700mA to operate for 50, 000 hours.
Electrical Assembly: Electronic 120 volt AC to 12 volt regulated DC, power supply.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

RSF2 Flat Opal Lens Steplyte or Bricklyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSF2 Flat Opal Lens Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSF2AL5D3E Flat Opal Lens Steplight with 3 LEDs
RSF2AL5D5E Flat Opal Lens Steplight with 5 LEDs

Select Finish: A Black or H Bronze
Optics: L5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.65 lb.

Hadco RSF2

Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.

Finish: Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: Opal Lens - made of UV stabilized injection molded polycarbonate. Specular aluminum formed reflector.

Lamping: Type 1 Luxeon® high-output LEDs powered at 350mA to operate for 50, 000 hours. Electrical Assembly: Supply wires connect directly to the quick connect on the integral power supply. Electronic 120 volt AC to 12 volt regulated DC, power supply.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

RSS2 Internal Louver Steplight or Bricklyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSS2 Internal Louver Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSS2AK5D3E Internal Louver Steplyte with 3 LEDs
RSS2AK5D5E Internal Louver Steplyte with 5 LEDs

Select Finish: A Black or H Bronze
Optics: K5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.75 lb.

Hadco RSS2

Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Gasketing is silicone. Fasteners are 300 series stainless steel. Note: Recessed housing contains four (4) 1/2 " NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Clear UV stabilized injection molded polycarbonate with 45° louvered screen insert.

Finish: Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels. Specular aluminum formed reflector.

Lamping: 13W CFL (GX23D-2). Type 1 Luxeon® high-output LEDs powered at 350mA to operate for 50, 000 hours. 40W maximum T10 lamps. Lower wattage lamps are acceptable.
Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Electronic 120 volt AC to 12 volt regulated DC, power supply.
Ballast: Core and coil, NPF, 0° starting temperature.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

RSV2 Vertical Louver Steplight or Bricklyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSV2 Vertical Louver Steplight or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSV2AK5D3E Vertical Louver Steplight with 3 LEDs
RSV2AK5D5E Vertical Louver Steplight with 5 LEDs

Select Finish: A Black. B White. H Bronze or N Natural Brass
Select Optics: K5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 8 3/4" (222mm)
Width: 3 1/4" (83mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.6 lb.

Hadco RSV2

Recessed housing contains four (4) 1/2 " NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Fasteners are 300 series stainless steel. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass. Gasketing is silicone.

Finish: Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: Specular aluminum formed reflector.

Lamping: 13W CFL (GX23D-2). Lower wattage lamps are acceptable. 40W maximum T10 lamps. Type 1 Luxeon® high-output LEDs powered at 350mA to operate for 50, 000 hours.
Electrical Assembly: Electronic 120 volt AC to 12 volt regulated DC, power supply. Single contact bayonet (S-8). 13W Fluorescent Socket is a GX23/GX23-2. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is 12 vo Light Internal electronic transformer has 120 volt input. Pre-wired with high temperature 18 AWG wire.
Ballast: Core and coil, NPF, 0° starting temperature.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

LED Underwater Light (ULW5D4)
Specialty Low Voltage Landscape Light

Hadco LED Underwater Light (ULW5D4) LED Pond Light
Specialty Low Voltage Landscape Light

ULW5D4-H LED Ultem Underwater

Finish: H Bronze only

Height: 6 11/16" (170mm)
Width: 4 1/16" (103mm)
Max. Weight: 5.04 lb.

Hadco ULW5D4

One-piece injection molded ULTEM® High Performance Polymer composite. Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance. Fasteners are 300 series stainless steel.

Finish: Composite is textured, pressure formed, molded-in-color.

Optical Assembly: Integral collimating flood (25°) optics. Clear convex lens, high temperature glass furnished with silicone O-ring for watertight seal.

H= Bronze

Lamping: Type 3 Luxeon® high-output LEDs powered at 700mA to operate for 50, 000 hours.
Electrical Assembly: Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts. Standard 10 ft. 16-3 AWG, 105° C, STOW water-resistant cord. Fixture is pre-wired and potted to prevent water entry. 12 Volt system requires remote transformer, not included.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards.
IP Rating: IP66/68 to 1M (3.28FT): Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet).