Hadco Steplytes (Step Lights)

Hadco RSC2 Aluminum 12 Volt Step Light

RSCL2AK5812 Black
RSCL2BK5812 White
RSCL2HK5812 Bronze

• 12 Volt
• Two 18 watt maximum
• Two 1141 Lamps (included)
• Remote transformer required

Hadco RSC2 Aluminum 120 Volt Step Light

RSC2AK5IE Black
RSC2BK5IE White
RSC2HK5IE Bronze

• 120 Volt
• 40 watt maximum
• T10 Lamp

RSC2AK5F13E Black
RSC2BK5F13E White
RSC2HK5F13E Bronze

• 120 Volt
• 13 watt maximum
• PLC13 Lamp

Housing– Back box, trim and face plate aluminum die casting containing less than .3% copper to prevent corrosion in concrete applications.

Fasteners– Captive, black oxide stainless steel. Gasket– Single-piece molded silicone.

Finish– Black, white or bronze thermoset powder coat.

Lens– Frosted tempered glass.

Socket– Incandescent, medium base; fluorescent, GX23-2 base; low voltage, single contact bayonet (S-8). Ballast– Fluorescent shall be core and coil, NPF Class B. Ballasts shall be factory wired and tested. Ballasts rated for 0°C starting temperature.

Transformers  >

Wiring Compartment– Internal wiring compartment contains two (2) 1/2" N.P.S. conduit taps in the bottom and one (1) 1/2" N.P.S. conduit tap in both sides. Sockets pre-wired with high temperature #18 wire, low voltage models pre-wired with 6-ft. cord and quick connector.

UL, cUL Listed.

Box Dimensions
8-1/4" (210mm) Long
2-5/8" (57mm) High
3-1/2" (89mm) Deep

See also Bricklytes (Brick Lights)

Photometrics:

Box Dimensions
Height: 2-5/8" (67mm)
Depth: 3-1/2" (89mm)
Length: 8-1/4" (210mm)

Faceplate Dimensions
Height: 3-1/2" (89mm)
Length: 9" (229mm) 1" Projection

Hadco RS2 LED 120 Volt Step Light/Brick Light

RSC2AK5D3E - Black
RSC2HK5D3E - Bronze
RSF2AL5D3E - Black
RSF2HL5D3E - Bronze
RSS2AK5D3E - Black
RSS2HK5D3E - Bronze
RSV2AK5D3E - Black
RSV2HK5D3E - Bronze

• 120 volt
• (3) Three 1 watt Luxeon® white LEDs
• Internal aluminum extrusion heat sink with integral LED power supply

Housing - Back box and trim, marine grade aluminum. Louvered face plate, marine grade aluminum. All others, polycarbonate faceplate.

Fasteners - Captive, black oxide stainless steel.

Gasket - Single-piece molded silicone.

Finish - UV stable polyester powdercoat for excellent weatherability. Available in black or bronze.

Lens - Tempered glass secured behind faceplate.

Ballast - Electronic 120 volt AC to 12 volt DC LED power supply.

Wiring Compartment - Internal wiring compartment contains two (2) 1/2" NPS conduit taps in the bottom and one (1) 1/2" NPS conduit tap in both sides. Supply wires connect directly to the quick connect on the integral power supply.

UL, cUL Listed

Transformers  >

RSC2

RSF2

RSS2

RSF2

Hadco RFL1 Aluminum 12 Volt Step Light

RFL1-A Black

• 12 Volt
• 12 watt maximum
• 93 Lamp (included)

Housing– Die cast aluminum face plate with steel, single gang recess box with stainless steel fasteners.

Finish– Black thermoset powder coat.

Lens– Frosted tempered glass.

Socket– Single contact bayonet (S-8).

Wiring– Pre-wired with 6-ft. pigtail and a quick connector for easy hookup to the supply cable.

Transformers  >

Box Dimensions
2-1/4" W 3-1/2" L 2-3/4" D
(50mm) (89mm) (70mm)

Hadco LineLyte 12 Volt Copper Step Light

HADCO's new LineLyte Series provides a unique way to enhance your deck or patio area. Available in Lengths ranging from 6"to 24", these natural copper fixtures mount easily under steps or railings to provide illumination for atmosphere and safety without the need to cut holes in or deface step risers. They mount with (2) screws via key slots on the top of the fixture. These fixtures use a 10,000 hour Xenon T3 lamp (included) for superior lighting and low maintenance while the socket swivels down for easy re-lamping.

LineLyte Copper StepLyte

• 12 Volt
• 12 watt maximum
• Wedge base lamp (included)

Material– Solid copper square extrusion with solid copper ends.

Finish– Natural copper will patina with age.

Socket– Wedge base hinged for relamping (LLL18 and LLL24 have 2 sockets each).

Reflector– Stainless steel.

Mounting– (2) #8 panhead stainless screws (supplied) via key slots.

Wiring– Pre-wired with a 6-ft. pigtail and quick connector for easy hookup to the supply cable.

UL, cUL Listed.

See More Copper Landscape Lighting >

RSC2 Louver Steplyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSC2 Louver Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSC2AK5D3E Louver Steplight with 3 LEDs
RSC2AL5D5E Louver Steplight with 5 LEDs

Select Finish: A Black. B White. H Bronze or N Natural Brass
Select Optics: K5 Symmetric Optics or L5 Symmetric Optics
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.64 lb.

Hadco RSC2

Fasteners are 300 series stainless steel. Gasketing is silicone. Recessed housing contains four (4) 1/2 " NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Integral and furnished as standard on all fixtures. This enables fixture to be used in accordance with NEC Article 680-51 in installations without an external low-water cutoff.

Finish: Zinc-rich primer and thermoset powdercoat for durability. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Optical Assembly: The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels. Reflector is formed from highly reflective aluminum. Symmetric.

Lamping: Type 3 Luxeon® high-output LEDs powered at 700mA to operate for 50,000 hours.
Electrical Assembly: Electronic 120 volt AC to 12 volt regulated DC, power supply.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

RSF2 Flat Opal Lens Steplyte or Bricklyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSF2 Flat Opal Lens Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSF2AL5D3E Flat Opal Lens Steplight with 3 LEDs
RSF2AL5D5E Flat Opal Lens Steplight with 5 LEDs

Select Finish: A Black or H Bronze
Optics: L5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.65 lb.

Hadco RSF2

Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.

Finish: Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: Opal Lens - made of UV stabilized injection molded polycarbonate. Specular aluminum formed reflector.

Lamping: Type 1 Luxeon® high-output LEDs powered at 350mA to operate for 50,000 hours. Electrical Assembly: Supply wires connect directly to the quick connect on the integral power supply. Electronic 120 volt AC to 12 volt regulated DC, power supply.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

RSS2 Internal Louver Steplight or Bricklyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSS2 Internal Louver Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSS2AK5D3E Internal Louver Steplyte with 3 LEDs
RSS2AK5D5E Internal Louver Steplyte with 5 LEDs

Select Finish: A Black or H Bronze
Optics: K5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 3 1/2" (90mm)
Width: 9" (229mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.75 lb.

Hadco RSS2

Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Gasketing is silicone. Fasteners are 300 series stainless steel. Note: Recessed housing contains four (4) 1/2 " NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Clear UV stabilized injection molded polycarbonate with 45° louvered screen insert.

Finish: Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels. Specular aluminum formed reflector.

Lamping: 13W CFL (GX23D-2). Type 1 Luxeon® high-output LEDs powered at 350mA to operate for 50,000 hours. 40W maximum T10 lamps. Lower wattage lamps are acceptable.
Electrical Assembly: 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Electronic 120 volt AC to 12 volt regulated DC, power supply.
Ballast: Core and coil, NPF, 0° starting temperature.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

RSV2 Vertical Louver Steplight or Bricklyte
Line Voltage LED Landscape Step and Deck Lighting

Hadco RSV2 Vertical Louver Steplight or Bricklyte
Line Voltage Landscape Step and Deck Lighting

RSV2AK5D3E Vertical Louver Steplight with 3 LEDs
RSV2AK5D5E Vertical Louver Steplight with 5 LEDs

Select Finish: A Black. B White. H Bronze or N Natural Brass
Select Optics: K5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x 1W LEDs

Height: 8 3/4" (222mm)
Width: 3 1/4" (83mm)
Depth: 3 1/2" (90mm)
Max. Weight: 3.6 lb.

Hadco RSV2

Recessed housing contains four (4) 1/2 " NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Fasteners are 300 series stainless steel. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass. Gasketing is silicone.

Finish: Zinc-rich primer and thermoset powdercoat for durability.

Optical Assembly: Specular aluminum formed reflector.

Lamping: 13W CFL (GX23D-2). Lower wattage lamps are acceptable. 40W maximum T10 lamps. Type 1 Luxeon® high-output LEDs powered at 350mA to operate for 50,000 hours.
Electrical Assembly: Electronic 120 volt AC to 12 volt regulated DC, power supply. Single contact bayonet (S-8). 13W Fluorescent Socket is a GX23/GX23-2. 4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact. Fixture is 12 vo Light Internal electronic transformer has 120 volt input. Pre-wired with high temperature 18 AWG wire.
Ballast: Core and coil, NPF, 0° starting temperature.

Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. ADA Compliant when used in indoor and outdoor wall applications.
IP Rating: IP66: Dust-tight and sealed against direct jets of water.

LED Housing Only LED Housing Only (RS2D-_HO)

Hadco RS2D-_HO LED Housing Only for Steplight or Bricklyte

RS2D-AHO LED Housing Only for Pre-Shipment, A Black
RS2D-BHO LED Housing Only for Pre-Shipment, B White
RS2D-HHO LED Housing Only for Pre-Shipment, H Bronze
RS2D-NHO LED Housing Only for Pre-Shipment, N Natural Brass

LED housing only. When housing only is ordered for pre-shipment, add suffix "LH" (Less Housing) to complete catalog number to fixture without housing.

Select Finish: A Black. B White. H Bronze or N Natural Brass