LBL Flare Collection includes Orb and Flare chandeliers
in six, twelve twenty or twenty four head versions with
stainless steel arms tipped with Murano blown Flare
glass available in several color choices. The coordinating
tiny Genie Mini Pendant uses a 10 watt G4 lamp. LBL
Spore pendant features Itailian flare glass surrounding
a center orb in an organic seven light configuration.
They may be suspended from a monopoint pendant, multipendants,
LBL Monorail or 2-Circuit Monorail.
Beautiful, contemporary chandelier with Murano blown
Flare glass. Available with twelve or twenty-four lights.
Orb 12 is 32" in width. Main assembly Height
is 12". 12V. Dimmable with 600W low-voltage electronic
dimmer.
Color options: blue, amber, clear, red.
Length options: 30"-50", 104"-120".
Canopy
Dimensions: 3.75" x 6"
For special sloped ceiling mount, consult factory.
Installed and shipped complete by LBL factory. Must
be ordered with fixture (for factory installation).
Optional Flare Heads
Flare Murano-blown glass heads can be ordered in four
color choices. All Flare heads are Italian made.
Above: LBL Orb 24 with Red Murano blown
glass
Below: LBL Orb 24 with Blue Murano blown
glass
Beautiful, contemporary chandelier with
Murano blown Flare glass. Available with
twelve or twenty-four lights. Orb 24 is
42" in width. Main assembly Height
is 12". 12V. Dimmable with 600W low-voltage
electronic dimmer.
Color options: blue, amber, clear, red.
Length options: 30"-50", 104"-120".
Canopy
Dimensions: 3.75" x 6"
For special sloped ceiling mount, consult
factory. Installed and shipped complete
by LBL factory. Must be ordered with fixture
(for factory installation).
05 44"-60"
or 40"-54" or 32"-44"
*When using Length code 05 for Flare 6,
Length will be 32"-44".
When using Length code 05 for Flare 12,
Length will be 40"-54". HS50 12
05 CR SC
10 104"-120"
(telescoping)
Halogen suspension fixture with six, twelve,
or twenty lights on bendable stainless steel
arms. Flare 20 is approximately 24"
to 30" in width. Flare 12 is 20"
in width. Flare 6 has a 16" approximate
Width. 12V. Dimmable with 600W low voltage
electronic dimmer.
Length options: 44"-60", 104"-120".
For special sloped ceiling mount, consult
factory. Installed and shipped complete
by LBL factory.
Optional Flare Heads
Flare Murano-blown glass heads can be ordered
in four color choices. All Flare heads are
Italian made.
Color options: blue, amber, clear, red.
AM amber
BU blue
CR clear
RD red
Replace CR (clear) with color code for color
options.
FSJ Fusion Jack (Fusion Jack canopies sold
separately)
MPT Monopoint (Includes 4" Round Flush
Canopy)
MR2 2-Circuit Rail
MRL Monorail
Italian flare glass surrounds a center
orb in an organic seven light configuration.
Includes specified low voltage lamp and
8' of field-cuttable suspension cable. For
use with 24 volt transformer, add suffix
"-24" to item number.
Additional optional colored flare glass
can be ordered.
G-323AM amber, G-323BU blue, G-323CR clear,
G-323RD red
LBL
Genie Mini Pendants
HS323 (color) SC 1B 10
Color options
AM amber
BU blue
CR clear
RD red
FSJ Fusion Jack (Fusion Jack canopies sold
separately)
MPT Monopoint (Includes 4" Round Flush
Canopy)
MR2 2-Circuit Rail
MRL Monorail
Small Italian flare-blown glass with tail.
Includes specified low voltage lamp and
8' of field-cuttable suspension cable. For
use with 24 volt transformer, add suffix
"-24" to item number.
LBL Lighting's unique solution to low-voltage
monorail lighting is recognized for its
finish quality and refreshing designs of
our many rail elements. LBL's focus has
been on the commonly requested components,
configuration choices, metal finish and
pre-curved rails, to simplify your lighting
design and installation.
Choose from four different kits that each
contain all the hardware needed for a typical
monorail installations.
Fusion™ Monorail kits simplify ordering
and design. Choose from four different kits
that each contain all the hardware needed
for a typical monorail installation. After
you decide on the configuration that best
suits your needs, simply add your choice
of pendants or heads to complete the kit.
LBL Straight Rail Kit with LBL Cube Curly
Heads
LBL
Straight Rail Kit
FUSIONKIT8ST
(2) 48" straight rails
(1) set straight connectors
(1) set of 4 end caps
(3) telescoping rigid standoffs (6-10")
(1) surface mount transformer housing
with (1) 300w electronic
transformer and 36" flexible coaxial
feeder cable
Option: Add a set of adjustable angle,
“T" , or “X" connectors
to create the “T" and “X"
shapes shown, rail must be cut. Rail is
easily field cuttable.
LBL Soft Curve Kit with Dome-SI Pendants
Mini-Dome II Swivel I heads
(1) surface mount transformer housing
with (1) 300w electronic transformer and
36" flexible coaxial feeder cable
(3) telescoping rigid standoffs (6-10")
LBL
48" Width Circle Rail Kit
FUSIONKIT4RD
(3) 40.5"curved rails (48"Width,
1/3 round)
(1) set of 4 end caps
(3) sets of straight conductive connectors
(1) surface mount transformer housing
with (1) 300w electronic transformer and
36" flexible coaxial feeder cable
(4) telescoping rigid standoffs (6-10")
LBL
Fusion Jack Multi-Canopy
3, 5 or 7 Light Fusion Jack Multi-Canopy
Model #: CK-FJMULTI-SC (satin chrome),
CK-FJMULTI-PC (polished chrome), CK-FJMULTI-BZ
(bronze).
To order as 120V in/24V out, add suffix
“-24" to item number.
To order as 277V in/12V out, add suffix
“-277" to item number.
To order for elements with LED MR16, add
suffix “-LED" to item number.
Supplied with (7) female Fusion Jack ports,
(7) male Fusion Jacks and (7) swag assemblies
for custom placement and arrangement of
up to (7) coaxial pendants, 300W elec trnsf.
Since not all female ports need to be occupied,
a multitude of configurations can be achieved.
Order elements as FSJ.
To Order:
Canopy
Dimensions: 3.75" x 6"
Flare
6 canopy dimensions: 2" x 6.5"
Mounting
options: fusion jack, monopoint, two-circuit
rail, monorail.
