WAC LED-TX24 PRO2 InvisiLED Damp Location Tape Light
PRO2 InvisiLED Damp Rated 300 lm/ft Tape Light
InvisiLED® Pro 2 24V Tape Light System
Power: 4W / ft
Lumens: Up to 330 lm / ft
CRI: 90
Rated Life: 80,000 hours
- Specially rated for installation in the storage area of a clothes closet
- UV stabilized protective coating protects LEDs and circuitry for long term use in damp locations
- Includes an end cap
- Max run length of 25 feet
Color Temp 22 - 2200K
LED-TX2422-1-WT
LED-TX2422-1-40-WT
LED-TX2422-5-WT
LED-TX2422-6IN-WT
Color Temp 27 - 2700K
LED-TX2427-1-WT
LED-TX2427-1-40-WT
LED-TX2427-5-WT
LED-TX2427-6IN-WT
Color Temp 30 - 3000K
LED-TX2430-1-WT
LED-TX2430-1-40-WT
LED-TX2430-5-WT
LED-TX2430-6IN-WT
Color Temp 35 - 3500K
LED-TX2435-1-WT
LED-TX2435-1-40-WT
LED-TX2435-5-WT
LED-TX2435-6IN-WT
Color Temp 45 - 4500K
LED-TX2445-1-WT
LED-TX2445-1-40-WT
LED-TX2445-5-WT
LED-TX2445-6IN-WT
- Delivered Lumens: Up to 13200lm
- 2200K, 2700K, 3000K, 3500K, 4500K
- CRI: Up to 90
- Power: 20W, 2W, 4W, 4W X 40
- Input: 24 VAC/DC
- Rated Life: 80000 Hours
- Both sides of field cut material can be used with male to male adapter
- Ultra thin profile at 1/8"
- Diodes spaced evenly at 1" on center
- May be field cut every 6" at the end of a run
- Transformer required
- Can be mounted on ceiling or wall in all orientations
UL & CUL Listed for damp locations
WAC InvisiLED Mounting and Wiring Accessories >
WAC LED-TX24 L Connector InvisiLED® Pro 2
InvisiLED® Pro 2 24V 5 LED "L" Connector
Each "L" connector consumes 2 Watts
Color Temp 22 - 2200K
LED-TX2422-5L-WT
Color Temp 27 - 2700K
LED-TX2427-5L-WT
Color Temp 30 - 3000K
LED-TX2430-5L-WT
Color Temp 35 - 3500K
LED-TX2435-5L-WT
Color Temp 45 - 4500K
LED-TX2445-5L-WT
- Delivered Lumens: 135lm
- 2200K, 2700K, 3000K, 3500K, 4500K
- CRI: Up to 90
- Power: 2W
- Input: 24 VAC/DC
- Rated Life: 80000 Hours
- Can be used with male to male adapter
- Ultra thin profile at .125"
- Diodes spaced evenly at 1" on center
- Transformer required
- Can be mounted on ceiling or wall in all orientations
WAC InvisiLED Mounting and Wiring Accessories >
WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light
EN-2460-RB2-T
120VAC
24VAC / 60W
ELV
Remote Enclosed Electronic Transformer for InvisiLED Tape Light 120V Input 24V Output 60 watt
6.5" x 1.625" x 1.25"
EN-24100-RB2-T
120VAC
24VAC / 96W
ELV
Remote Enclosed Electronic Transformer for InvisiLED Tape Light 120V Input 24V Output 96 watt
6.625" x 1.625" x 1.125"
Includes a 6 foot lead wire
UL & CUL Listed for damp locations
WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light
EN-24100-277-RB2-T - Remote Enclosed Power Supply 120-277VAC Input 24VDC Output 96 watt
EN-24100-277-RB2-T
120 - 277VAC 24VDC / 96W 0-10V
12.625" x 3.25" x 2"
Includes a 6 foot lead wire
- Input: 120-277 VAC, 50/60Hz
- Short circuit, over current, over voltage, over temperature protection.
- Class 2. 1W minimum load; 96 maximum load
- Preinstalled with 6' InvisiLED 24V lead wire . Also compatible with Straight Edge, Line, Line 2.0, HR-LED87 and HRLED90 fixture applications. 6' adapter cable included.
- Built-in auto reset, soft start, short and overload circuit
UL & CUL Listed for damp locations
WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light
EN-2460-P-AR-T
120VAC
24VAC / 60W
Plug-in Electronic Transformer for InvisLED Tape Light 120V Input 24V Output 60 watt 2.75" x 1.625" x 1.75"
Includes a 6 foot lead wire
UL & CUL Listed for damp locations
WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light
EN-24100-P-AR-T
120VAC
24VAC / 96W
Plug-in Electronic Transformer for InvisLED Tape Light 120V Input 24V Output 100 watt
2.75" x 1.625" x 1.75"
Includes a 6 foot lead wire
UL & CUL Listed for damp locations
Under Counter, Task & Display >
