WAC Lighting Under Cabinet Puck Lights, Button Lights, Halogen & LED Miniature Recessed Lights (Retired)

WAC LEDme HR-LED87 LED Button Light - Recess or Surface Mount

LEDme® Button Light HR-LED87
Recessed or Surface Mount
Designed for recessed or surface mounted installations, delivering strong light output with the latest in LED technology.

• Power: 4.8W
• Lumens: Up to 180
• Compares To: 20W Xenon Bi-pin
• CRI: 85
• Cutout: 2 1/8"
• Dimming: 100% - 10%
• Die-cast aluminum construction
• 70,000 hour rated life

LEDme® Button Light Retrofit Housing available to replace recessed HR-88 halogen/ HR-86 xenon using exisiting cutout and wiring.

Finish: BK-Black, BN-Brushed Nickel, CB-Copper Bronze, CH-Chrome, DB-Dark Bronze, WT-White
LED 4.8W, 2700K or 3000K color temp
Includes 6 foot lead wire
*Power consumption may vary depending on the efficiency of the power supply being used

Recessed or surface mounting
Quick and easy installation
Includes 72" lead wire
3000K color temperature
70,000 hour rated life
UL and CUL Listed
5 year WAC Lighting product warranty

Construction: Die-cast aluminum fixture, stamped steel housing for surface mount. Glass beam spread lens.
Wiring: Includes 72" pre-installed wires that lead out through the top.
Transformers: Class 2, 24V remote and plug-in transformers allow for up to 20 button lights to be wired together. Use a multiple terminal block to wire up to 6 fixtures in a neat under cabinet installation without the use of open splices (see below).
Six 3000K LEDs.
Dimming: May be dimmed to 10% with an electronic low voltage (ELV) dimmer.
Mounting: Recessed– 28" cutout hole. Compression springs hold fixture firmly in place. Surface– Screw housing cover to surface, compress springs and insert into cover. Not recommended for use in ceiling.

Finish: Black (BK), Dark Bronze (DB) and White (WT) powder coat, electroplated Brushed Nickel (BN), Copper Bronze (CB) and Chrome (CH).
Standards: UL & CUL Listed.

WAC LEDme HR-LED87S Square LED Button Light - Recess or Surface Mount

LEDme® Button Light HR-LED87
Recessed or Surface Mount
Designed for recessed or surface mounted installations, delivering strong light output with the latest in LED technology.

• Power: 4.8W
• Lumens: Up to 180
• Compares To: 20W Xenon Bi-pin
• CRI: 85
• Cutout: 2 1/8"
• Dimming: 100% - 10%
• Die-cast aluminum construction
• 70,000 hour rated life

LEDme® Button Light Retrofit Housing available to replace recessed HR-88 halogen/ HR-86 xenon using exisiting cutout and wiring.

Finish: BK-Black, BN-Brushed Nickel, CB-Copper Bronze, CH-Chrome, DB-Dark Bronze, WT-White
LED 4.8W, 2700K or 3000K color temp
Includes 6 foot lead wire
*Power consumption may vary depending on the efficiency of the power supply being used

Recessed or surface mounting
Quick and easy installation
Includes 72" lead wire
3000K color temperature
70,000 hour rated life
UL and CUL Listed
5 year WAC Lighting product warranty

Construction: Die-cast aluminum fixture, stamped steel housing for surface mount. Glass beam spread lens.
Wiring: Includes 72" pre-installed wires that lead out through the top.
Transformers: Class 2, 24V remote and plug-in transformers allow for up to 20 button lights to be wired together. Use a multiple terminal block to wire up to 6 fixtures in a neat under cabinet installation without the use of open splices (see below).
Six 3000K LEDs.
Dimming: May be dimmed to 10% with an electronic low voltage (ELV) dimmer.
Mounting: Recessed– 28" cutout hole. Compression springs hold fixture firmly in place. Surface– Screw housing cover to surface, compress springs and insert into cover. Not recommended for use in ceiling.

Finish: Black (BK), Dark Bronze (DB) and White (WT) powder coat, electroplated Brushed Nickel (BN), Copper Bronze (CB) and Chrome (CH).
Standards: UL & CUL Listed.

WAC HR-1137 Gimbal Ring Miniature Recessed Lighting

Low Voltage Miniature Recessed - HR-1137 Gimbal Ring
Low voltage miniature recessed bevel trim unit with clear glass lens. Used for lighting in cabinets, displays and similar wooden applications.
Not intended for use in walls or ceilings.

• All steel construction
• Cutout template included for recessed installations
• Supplied with 36 inch lead wires
• Low profile and shallow installation depth
• Requires a Class 2 transformer
• Order lamp separately

Shallow installation depth ideal for use in shelving, cabinets and displays.
Not intended for use in walls or ceilings
Mounts quickly with butterfly clips
Requires a Class 2 transformer
Order lamp separately
Lamp has a 35° adjustable tilt from nadir
The supplied clear glass lens can be replaced with one lens accessory.
An all-in-one style recessed unit, comes with housing and trim - ready to install out of one box.
Non-IC unit. Intended for installations where insulating
materials will not be present.

Materials: Housing is steel, painted black. Electrical components within the can are a bi-pin ceramic socket with nickel plating and 18 gauge teflon insulated wires with fiberglass sleeves. A total of 36" of insulated wires lead from the socket out the top of the can to the strip-prepared ends.
Transformers: Remote Class 2 Transformer required (order separately).
Use one MR11 20W max, 12V lamp (order separately).
Mounting: 2s" cutout hole. Two flat "wing" springs expand against the cut out hole to hold fixture against the surface. The insulated wires and socket are pre-installed in the housing with the wires leading out through the top of the housing. Simply connect to the remote class II transformer.
Standards: UL & CUL Listed