Contemporary Ceiling Fans

FP2120MG (1) Metro Gray finish

FP2120WA (1) Metro Gray finish fan with Walnut finish blade

FP2120RB (1) custom finish (Red/Brown)

Fanimation Enigma Fan Available Finishes

• FP2120MG
  MG Metro Gray
• FP2120WA
  WA Metro Gray with Walnut Wood Blade

Fanimation Enigma® fan is available in custom finishes.

Custom Finishes are available by special order only.

Dimensions shown in inches

Distance from Ceiling to Bottom of Fan

FP8008CH (1) chrome finish fan with opal frosted light kit and reversible cherry/mahogany finish blades

FP8008CH (1) chrome finish fan with opal frosted light kit and reversible cherry/mahogany finish blades

FP8008CH (1) chrome finish fan with opal frosted light kit and reversible cherry/mahogany finish blades

Fanimation's MultiMax Ceiling Fans

FP8008CH $399.00

One versatile fan, two lighting and six blade configuration options, this fan truly offers something for everyone!

• Available in Chrome finish with reversible cherry/mahogany blades
• Fan can be assembled in 2-,3- or 4-blade configuration with ease
• Includes opal frosted glass light kit and cap for use with no light
• Two 18-watt low profile CFl bulbs included
• Fan rated for dry locations only
• 52" blade sweep
• 14 degree blade pitch
• Ceiling Slope to 30 degrees
• Downrod included - 1/2" diameter by 6" length, longer lengths available
• Optional close to ceiling kit available
• Three forward and three reverse speeds
• CRL8TS touch screen hand-held remote control included
• UL Listed

FP8008CH (1) chrome finish fan with opal frosted light kit and reversible cherry/mahogany finish blades

FP8008CH (1) chrome finish fan with opal frosted light kit and reversible cherry/mahogany finish blades

FP7900MG (1) metro gray finish fan with opal frosted glass

FP7900OB (1) oil-rubbed bronze finish fan with opal frosted glass

Fanimation's Torto Ceiling Fans

A new twist on an old friend. Put a new twist on things by adding this unique, three bladed design to your interior. The Torto is sure to be the much envied center piece of your room.

• Important: The Torto's airflow pattern is not that of your typical ceiling fan. It pushes air at an angle, not straight down..
• Available in metro gray and oil-rubbed bronze finishes with opal frosted glass
• Fan rated for dry and damp locations
• 52" blade sweep
• Varying blade pitch
• Two 60-watt candelabra bulbs included
• Ceiling Slope to 30 degrees
• Downrod included 1" diameter x 6" length, longer downrods available
• Three forward, three reverse speeds
• C20 hand-held reversing remote control included
• Optional controls sold seperately
• UL LISTED

Fanimation's Torto Ceiling Fan's airflow is just as distinctive as its styling. The Torto's airflow pattern is not that of your typical ceiling fan. It pushes air at an angle, not straight down. You will feel far more air flow when you stand next to it than when you are directly underneath it.

The above picture illustrates. As with any fan, airflow is increased if the fan is installed with a longer downrod.

FP4620OB (1) oil-rubbed bronze finish fan with reversible cherry/walnut finish wood blades

FP5620OB (1) oil rubbed bronze finish fan with reversible cherry/walnut finish wood blades

Above: FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades
LK4620SN (1) satin nickel finish light kit with opal glass (sold separately)
Below: FP5620PW (1) pewter finish fan with reversible cherry/walnut finish wood blades

Fanimation's Huxley Ceiling Fans

A new look. Original design with eye catching curves, and Energy Star rated, the Huxley is a must have addition to your home.

• Available in oil-rubbed bronze finish and pewter finish
• Reversible cherry/walnut finish blades included
• 52" blade pitch
• 188 x 20 motor
• 14° blade pitch
• Three forward and three reverse speeds, reversing switch located on switch cup
• Limited lifetime warranty
• Fan rated for dry locations only
• Minimum 9' ceiling height required
• 6" x 1" downrod included
• UL listed
• Ceiling slope to 30° (up to 52° with SCB1-52)
• 80" lead wires
• Patent Pending

FP4620OB (1) oil-rubbed bronze finish fan with reversible cherry/walnut finish wood blades

FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades
LK4620SN (1) satin nickel finish light kit with opal glass (sold separately)

FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades

Fanimation's Zonix Ceiling Fans

Modern Sophistication. Modern. Clean. Beautiful. The Zonix, features three sleek, reversible wood blades and is available in satin nickel and oil-rubbed bronze.

• Available in satin nickel and oil-rubbed bronze finish
• Reversible cherry/walnut blades included
• 54" blade pitch
• 153 x 18 motor
• 14° blade pitch
• 4 speed wall control included (CW40)
• Fan rated for dry locations only
• Reversing switch on fan housing
• Optional light kit with opal glass available in oil-rubbed bronze finish LK4620OB and satin nickel finish LK4620SN sold separately. Light kit requires additional control (C2 C4FL)
• Also accepts standard fitters and light kits
• 6" x 1" downrod included
• Includes CW40 4-speed wall control (fan only)
• UL listed 
• Ceiling Slope to 30 degrees (up to 52 degrees with SCB1-52)
• 80" lead wires
• Patent Pending

FP4620SN (1) satin nickel finish fan with reversible cherry/walnut wood blades

FP4630SN (1) satin nickel finish fan with satin nickel blades

Below: VE56BL Black Velocity Industrial Fan
Above: VE56W White Velocity Industrial Fan

Velocity fan from Craftmade

The Velocity from Craftmade gives you the perfect industrial, warehouse or retro fan. This 3-blade series comes packed with fan, blades and wall control all in one.

Black VE56BL Retail Price: $121.00
White VE56W Retail Price: $121.00
Prices include blades and 4-speed fan control

• Black and White finishes Available
• 4-Speed Wall Control Included
• Dual Mounting System
• 30 Year Limited Warranty
• 12" Down Rod Included
• 3-Metal Blades Included
• Heavy Duty Motor: 188x22mm on VE56 and 188x15mm on VE48.

Dual Mounting System: Velocity fan comes standard with both J-Hook and Standard Ball Hanger mounting systems.

Blades must be mounted at least 10' above floor for safety.

4-Speed Wall Control Included

FPS7880OB (1) oil-rubbed bronze finish fan with opal frosted glass
HA7880CY (1) cherry finish woven housing accessory

FPS7880SN (1) satin nickel finish fan with opal frosted glass
HA7880WA (1) walnut finish woven housing accessory

FPS7880SN (1) satin nickel finish fan with opal frosted glass

Fanimation's Inlet Ceiling Fans

Cool Lines, Cool Breezes. Finally, a cool, sleek and functional, close-to-the-ceiling fan, with so much flair that allows you to enjoy the cool breezes in any room of your house.

• Available in oil-rubbed bronze and satin nickel finishes with opal frosted glass
• Reversible cherry/walnu blades included
• Fan rated for dry locations - damp location rated when used with BPW7880CY, BPW7880WA or BPW7880SN blade sets (sold seperately)
• One 18-watt GU24 CFL light bulb included
• 52" blade sweep with blade set included
• 42" blade sweep with optional 18" blade sets
• 14 degree blade pitch
• Fan mounts flush to ceiling and does not require use of a downrod
• Distance from ceiling is 8 3/8" and distance from ceiling to bottom of fan is 11 1/2"
• Three forward and three reverse speeds
• C20 hand-held reversing remote control included
• Optional controls sold seperately
• Patents Pending
• UL LISTED

FPS7880OB (1) oil-rubbed bronze finish fan with opal frosted glass
BPW7880WA (1) 18" walnut finish all-weather composite blade

FPS7880SN (1) satin nickel finish fan with opal frosted glass
B7880SN (1) 23" satin nickel finish blade

FPS7880SN (1) satin nickel finish fan with opal frosted glass

FPS7880SN (1) satin nickel finish fan with opal frosted glass
HA7880CY (1) cherry finish woven housing accessory

Above: Mach One, Gloss Black finish, Gloss Black ABS blades
Below: Mach One, Titanium finish, Titanium ABS blades

Mach One, White finish, White ABS blades

Monte Carlo Mach One Modern Ceiling Fan 3MO52

Finish: Gloss Black finish, Gloss Black ABS blades
Titanium finish, Titanium ABS blades
White finish, White ABS blades

Airflow: 5,873 CFM
Electricity Use: 71 watts
Airflow Efficiency: 83 CFM/watt

Product Details

• Premium power 172 X 20 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 13 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling installation with longer downrods.
• Includes Wall Remote With Uplight with downlight.
• Monte Carlo Limited Lifetime Warranty.

Above: Mach Two, Titanium finish, Titanium ABS blades
Below: Mach Two, White finish, White ABS blades

Monte Carlo Mach 2 Modern Ceiling Fan 3MTR38

Finish: Titanium finish, Titanium ABS blades
White finish, White ABS blades

Airflow
3,973 CFM Electricity Use
61 watts Airflow Efficiency
65 CFM/watt

Product Details

• Premium power 172 X 14 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 13 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling installation with longer downrods.
• Includes Wall Remote With Uplight with downlight.
• Monte Carlo Limited Lifetime Warranty.

Monte Carlo 56" Hartley Fan Brushed Steel Modern Ceiling Fan 3MTR38

Finish: Brushed Steel
Blade Finish: Silver / Silver
Glass: Acid Frosted
Light Kit: 3 Candelabra 40w Max. (included)
Height: Fan: 17 29/32''
Min. Ceiling Height: 7 7/8'
Weight: 24.64 lbs.
Blade Pitch: 14°
Listings: UL / cUL Listed

Airflow 5,056 CFM
Electricity Use 65 watts
Airflow Efficiency 78 CFM/watt

Product Details

• Premium power 188 X 20 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 14 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling installation with longer downrods.
• Includes Wall Remote With Uplight with reverse and downlight.
• Monte Carlo Limited Lifetime Warranty.

Monte Carlo 66" or 52" Lunar Modern Ceiling Fan 3LRR

Finish: Titanium or White
Blade Finish: Titanium ABS or White ABS
Glass: Matte Opal
Light Kit: 1 GU24 18w Max. (included)
Height: Fan: 19 5/16''
Min. Ceiling Height: 7 31/32'
Weight: 23.32 lbs.
Blade Pitch: 25°
Listings: UL / cUL Listed

Airflow 6,890 CFM
Electricity Use 69 watts
Airflow Efficiency 100 CFM/watt

Product Details

• Premium power 188 X 20 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 25 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling installation with longer downrods.
• Includes Wall Remote With Uplight with reverse and downlight.
• Blanking plate included for installations without light kit.
• Monte Carlo Limited Lifetime Warranty.

Monte Carlo 38" or 22" Lunar II Modern Ceiling Fan 3LR38 or 3LR22

Finish: Titanium finish, Titanium ABS blades
White finish, White ABS blades

Airflow 3,277 CFM
Electricity Use 43 watts
Airflow Efficiency 77 CFM/watt

Product Details

• Premium power 153 X 10 mm torque-induction motor for whisper quite operation
• Triple capacitor, 3 speed reversible motor.
• Precision balanced motor and blades for wobble-free operation.
• 28 degree blade pitch designed for optimal air.
• Extra long 6.5 foot wire for high ceiling installation with longer downrods.
• Blanking plate included for installations without light kit.
• Monte Carlo Limited Lifetime Warranty.

Above: BL52W White Bloom with 52" Green and Pink Blades
Below: BL52W White Bloom with 52" Pink Blades

Integrated light kit

Craftmade BL52 Bloom Ceiling Fan

BL52W Retail Price: $261.00

It's all about flowers, fun, and motion with this whimsical addition to your child's space or any eclectic or fun room.

Specs
Blade Sweep: 52"
Number of Blades: 10
Blade Pitch: 13.5°
Motor Size (mm): 188 x 15
Amps (High Speed): 0.42
Watts-Electricity Use* (High Speed): 49
RPM (High-Med-Low): 162-117-63
Shipping Wt. (lbs): 33.38
Carton Size (Cuft.): 2.47
Airflow* (Cubic Feet per Minute): 4202
Airflow Efficiency* (Cubic Feet per Minute per Watt): 86

Features
Heavy Duty, 3 Speed Reversible Motor
6" Downrod (Included)
Limited Lifetime Warranty
Blades Sold Separately
Integrated Light Kit (2-GU24-27K CFL Bulbs Included)
TCS Remote Control (Included)
TCS Plus Wall Control Available (Optional)
Compare: 49" to 60" ceiling fans have airflow efficiencies ranging from approximately 51 to 176 cubic feet per minute per watt at high speed.

Available Finishes
Finish: W White

Blade Options
Model Specific - All Available Options Shown Left

Light Kit Options
Integrated Light Kit

Remotes
TCS-PLUS Wall Control (Optional)
TCS Remote Control (Included)