Track Lighting

Track & Components

Track Lighting Heads

Track Adaptable Fixtures

WAC Track & Quick Connect Fixtures

Track Lighting Pendants

Track Adaptable Pendants

Fixed Track

Accessories

WAC Lighting Two-Circuit Tracks & Components

Customize Your Track Lighting System

Ceiling mounted track lighting with adjustable spotlight fixtures and pendants are an excellent choice for both residential and commercial use. There are an unbelievable variety of attractive and functional fixures available.

Track lights make it easy to make changes in your lighting. You can mix pendants and track heads to direct light on specific areas.

2-Circuit Track track saves on installation costs by eliminating the need for long separate feed runs. Compatible with JHT and JTK track heads as well as Monorail fixtures and shades when used with QC (Quick Connect) Transformer.

Design your track layout.

Determine what you want to light.
Decide where track heads, pendants or both will be placed to direct light where you want it.
Be careful that lights won't shine right in your eyes or create shadows in work areas. (Remember you can easily move the lights, though.)
Design the Track Lighting layout, connecting the lights.
Track Lighting runs in straight lines, but does not have to run parallel to a wall.
Track is available in connectable four, eight or twelve foot sections which may be field cut to exactly the length you want.
L, T and X connectors allow monorail to make right angles.
A flexible track connector allows your track design to turn at a 60° to 180° angle.
Dead-End connectors allow you to switch and dim sections of rail separately.
Choose Single or 2-Circuit track. Single Circuit is available compatible with Halo, Juno or Lightolier and has a 20 Amp capacity. Juno compatible 2-Circuit track carries two circuits that can be used independently (up to 2400 watts on each circuit) allowing different pendants or lights on a single track to be controled by different switches. If used together, jointly switched (up to a total of 4800 watts) allows more lights on a single track.
Choose a finish. WAC Lighting Track is available in Dark Bronze, Brushed Nickel, Black or White.

Determine your mounting.

Track can be attached to the ceiling, suspended or mounted off the wall.
If the track is to be suspended, determine how far from the ceiling you would you like your track to run. A kit is available with everything you need to suspend track up to 48" or even more using Extension rods. A sloped ceiling adapter is available.
Attach directly to T-bar drop ceilings using the correct attachment.
Wall mount brackets extend track 24" from the wall.

Select your power feed.

A floating canopy can be connected anywhere along the length of the track.
A live end connector brings power to the end of a track.
Track lighting is a line voltage system. No transformer is required.

Choose your lights.

Decide where the fixtures should be installed to put light where you want it.
Select from hundreds of low and line voltage pendants and fixtures.
Extension stems can extend fixtures up to 48" from the track or even more using Extension rods.
Add optional colorful and decorative accessories and functional optical controls.
Adapters allow fixtures from many companies to be used on the same track.
Use nearly any pendant, whether it is designed for track or not using an adapter. If the pendant is heavier, add a hook suspending the pendant exactly where you want it.

(Or start with fixtures and accessories, then decide which layout will best support them.)

Identify Types of Track Lighting

There are 3 standard types of track lighting. If you are adding to an existing system you will need to determine which type of track lighting you have.

Single Circuit Track

120V Single Circuit has a 20 Amp capacity. It is available compatible with Halo, Juno or Lightolier.

WAC Lighting Single-Circuit Tracks & Components >

Two-Circuit Track

Juno compatible 2-Circuit track carries two circuits that can be used independently (up to 2400 watts on each circuit) or jointly switched (up to a total of 4800 watts) used together. This can give you more control, allowing different pendants or lights on a single track to be controled by different switches or more capacity allowing more lights on a single track.

Track

WAC Two-Circuit Track

WAC Two-Circuit Track on Amazon

Two end caps and mounting hardware supplied with each section.

Field cuttable and easily installed on sheetrock, plaster, wood, or suspended ceilings.
May be suspended on WAC SK-18", 24", 36" or 48" suspension kits (see below for ordering information).
Electrical connections available to supply power anywhere on a single track or run (used with a live end, a BX-style live end or a floating canopy).
Juno^® compatible systems available only.

Finish: Dark Bronze, Brushed Nickel, Black or White

H: Halo^® compatible
J: Juno^® compatible
L: Lightolier^® compatible

Model No.	Length	wide	Height
J2-T4	47.25"	1.5"	7/8"
J2-T8	94.5"	1.5"	7/8"
J2-T12	142"	1.5"	7/8"

Juno^® compatible Two-Circuit Track
J2-T4-BK	J Series (Juno compatible) 2 Circuit 4 Foot Track - Black
J2-T4-WT	J Series (Juno compatible) 2 Circuit 4 Foot Track - White
J2-T8-BK	J Series (Juno compatible) 2 Circuit 8 Foot Track - Black
J2-T8-WT	J Series (Juno compatible) 2 Circuit 8 Foot Track - White
J2-T12-BK	J Series (Juno compatible) 2 Circuit 12 Foot Track - Black
J2-T12-WT	J Series (Juno compatible) 2 Circuit 12 Foot Track - White

WAC Lighting ENDCAP for Track Lighting

WAC Lighting Track Endcaps on Amazon

J-ENDCAP-BK	J Series (Juno compatible) End Cap For Track
J-ENDCAP-BN	J Series (Juno compatible) End Cap For Track
J-ENDCAP-WT	J Series (Juno compatible) End Cap For Track

Isolated grounding conductor, decorative end.
Two end caps are supplied with each section of track ordered.
This is only neccessary if you are field cutting track and will have more ends than endcaps supplied. Remember a live end power feed finishes off the end where it is used.

J-ENDCAP - J/J2 Track

Track Connectors

WAC Lighting 2-Circuit Track "I" Connector

WAC Lighting 2-Circuit Track "I" Connector on Amazon

Joins two sections of track with electrical continuity

J2 Track

J2-I-BK	J Series (Juno compatible) 2 Circuit I Joiner
J2-I-WT	J Series (Juno compatible) 2 Circuit I Joiner

WAC Lighting 2-Circuit Track "I" Dead End Connector

WAC Lighting 2-Circuit Track "I" Dead End Connector on Amazon

Joins two sections of track without electrical continuity

J2 Track

J2-IDEC-BK	J Series (Juno compatible) 2 Circuit I Joiner W/ Dead End
J2-IDEC-WT	J Series (Juno compatible) 2 Circuit I Joiner W/ Dead End

WAC Lighting 2-Circuit Track "L" Connector - Left or Right

WAC Lighting 2-Circuit Track "L" Connectors on Amazon

Joins two track sections to make power feedable 90° left-hand polarity turns

J2L-LEFT or JL-RIGHT - J2 Track

J2-LLEFT-BK	J Series (Juno compatible) 2 Circuit Left L Joiner
J2-LLEFT-WT	J Series (Juno compatible) 2 Circuit Left L Joiner
J2-LRIGHT-BK	J Series (Juno compatible) 2 Circuit Right L Joiner
J2-LRIGHT-WT	J Series (Juno compatible) 2 Circuit Right L Joiner

WAC Lighting 2-Circuit Track "T" Connector

WAC Lighting 2-Circuit Track "T" Connector on Amazon

Joins three track sections in a "T" configuration
Power feedable on H and J only
T connector with opposite polarity can be custom ordered.

J2T - J2 Track

J2-T-BK	J Series (Juno compatible) 2 Circuit T Joiner
J2-T-WT	J Series (Juno compatible) 2 Circuit T Joiner

WAC Lighting 2-Circuit Track "X" Connector

WAC Lighting 2-Circuit Track "X" Connector on Amazon

Joins four track sections in an "x" configuration
Power feedable on H and J only

J2 Track

J2-X-BK	J Series (Juno compatible) 2 Circuit X Joiner
J2-X-WT	J Series (Juno compatible) 2 Circuit X Joiner

WAC Lighting 2-Circuit Track Flexible Track Connector

WAC Lighting 2-Circuit Track Flexible Track Connector on Amazon

Connects two track sections at angles from 60 to 180 degrees
Use as a transition from wall-to-wall, wall-to-ceiling, or ceiling to ceiling

J2 Track

J2-FLX-BK	J Series (Juno compatible) 2 Circuit Flexible Connector
J2-FLX-WT	J Series (Juno compatible) 2 Circuit Flexible Connector

Mounting

Ceiling Mounted

Standard mounting hardware is supplied with each track section.
Track can be attached directly to a flat or sloped ceiling.

WAC Lighting T-BARCLIP T-Bar Drop Ceiling Attachment

WAC Lighting T-BARCLIP T-Bar Drop Ceiling Attachment on Amazon

T-BARCLIP T-Bar Drop Ceiling Attachment

Attaches track to T-bar drop ceilings
Use two for 2 foot or 4 foot tracks, three for 6' or 8' track

Finish: Chrome
1.5" x 1.25"

JTK-765 J Series Line Voltage PAR38 150w Track Heads >
Suspended using SK48 48" Track Suspension Kits

WAC Track Suspension Stem Kit SK18, SK24, SK36 & SK48

WAC Track Suspension Stem Kits on Amazon

Kit includes track bracket, rod and ceiling canopy. Canopy covers a 4" octagon box and permits power wiring through the rod. Par ts and instructions included.

SK18 18"
SK24 24"
SK36 36"
SK48 48"

Finish: Black or White

Used to suspend any line volt track systems from a ceiling or dropped ceiling. Kit consists of a ceiling canopy, down rod and track bracket. Canopies come with hardware to mount to either a junction box or ceiling surface. Drop grid ceilings require T-Bar clips. Rod allows power feed wires (up to three 12 gauge wires) through the center, and supports the weight of the track. Rods should be positioned over a power component such as a live end or "I" power connector

Use two suspension kits for 2"and 4' tracks, three kits for 6' and 8' track sections. For power to 2-wire systems, add a live end (LLE) or flexible connector (LFLX) or straight line power connector (LI-PWR). For power to 3-wire or Wide 2-wire systems (J-style), connect with HLE or JLE, HI-PWR or JI-PWR, HFLX or J FLX.

WAC Track Suspension kits

Track Suspension kits can hang the entire track from rods or cables. The canopy can cover an outlet box and provide the power as well as supporting the weight of the track. WAC offers 18", 24", 36", or 48" stems to suspend track lighting.

SK18-BK	18"	Black
SK18-BN	18"	Brushed Nickel
SK18-DB	18"	Dark Bronze
SK18-WT	18"	White
SK24-BK	24"	Black
SK24-BN	24"	Brushed Nickel
SK24-DB	24"	Dark Bronze
SK24-WT	24"	White
SK36-BK	36"	Black
SK36-BN	36"	Brushed Nickel
SK36-DB	36"	Dark Bronze
SK36-WT	36"	White
SK48-BK	48"	Black
SK48-BN	48"	Brushed Nickel
SK48-DB	48"	Dark Bronze
SK48-WT	48"	White

WAC Lighting Track Lighting Suspension Kit Extension

WAC Track Suspension Stem Kits on Amazon

Extends track from ceiling
Lengths longer than 96" not recommended as a voltage drop may occur
72" rod shipped as two 36" rods with threaded coupler to be joined in the field
96" rod shipped as two 48" rods with threaded coupler to be joined in the field

Finishes: BK-Black, BN-Brushed Nickel, DB-Dark Bronze, WT-White

R18-BK	18"	Black
R18-BN	18"	Brushed Nickel
R18-DB	18"	Dark Bronze
R18-WT	18"	White
R24-BK	24"	Black
R24-BN	24"	Brushed Nickel
R24-DB	24"	Dark Bronze
R24-WT	24"	White
R36-BK	36"	Black
R36-BN	36"	Brushed Nickel
R36-DB	36"	Dark Bronze
R36-WT	36"	White

WAC SK14 Sloped Ceiling Hang Straight Adapter for Track Suspension kits

WAC SK14 Sloped Ceiling Hang Straight Adapter for Track Suspension kits on Amazon

Swivel Adapters are available to accommodate sloped ceilings. Use with suspension kits (above) to accomodate sloped ceilings. Max Capacity: 7A, 800w, 120v

SK14

Finish: BK-Black, BN-Brushed Nickel, DB-Dark Bronze or White

SK14-BK	Sloped Ceiling Hang Straight Adapter
SK14-WT	Sloped Ceiling Hang Straight Adapter
SK14-BN	Sloped Ceiling Hang Straight Adapter
SK14-DB	Sloped Ceiling Hang Straight Adapter

WAC Lighting J2-WCOV Wire Way Cover for 2-Circuit Track

WAC Lighting J2-WCOV 2-Circuit Track Wire Way Cover on Amazon

J2-WCOV-BK	J Series (Juno compatible) 2 Circuit Track Susp Wire Cover
J2-WCOV-WT	J Series (Juno compatible) 2 Circuit Track Susp Wire Cover

Wire way cover for suspended track

Conceals electrical feed wires from stem to track live end

WAC Lighting SK05 Suspension Adjustment Collar for Track Lighting

WAC Lighting SK05 Track Suspension Adjustment Collar on Amazon

Used when suspension rod is field cut to custom lengths

SK05-BK	Adapter Kit To Field Cut Sk Extension
SK05-BN	Adapter Kit To Field Cut Sk Extension
SK05-DB	Adapter Kit To Field Cut Sk Extension
SK05-WT	Adapter Kit To Field Cut Sk Extension

WAC Lighting RI Rod Coupler for Suspending Track Lighting

WAC Lighting Black Rod Coupler on Amazon
WAC Lighting White Rod Coupler on Amazon
WAC Lighting Brushed Nickel Rod Coupler on Amazon

Join two rods for suspensions longer than 48"

RI-BK	Rod Couplers For R-Extension
RI-BN	Rod Couplers For R-Extension
RI-DB	Rod Couplers For R-Extension
RI-WT	Rod Couplers For R-Extension

WAC TBKT Track Wall Suspension Bracket

WAC White 24" Track Wall Mount Bracket on Amazon
WAC Brushed Nickel 24" Track Wall Mount Bracket on Amazon
WAC Dark Bronze 24" Track Wall Mount Bracket on Amazon
WAC Black 24" Track Wall Mount Bracket on Amazon

Using the WAC TBKT Track Suspension Bracket any Halo, Juno, Lightolier or compatible track can be wall mounted. Ideal for picture lighting or wall grazing effects. An effective lighting solution where very high ceilings create an ambient lighting problem.

TBKT-BK	Track Bracket-Extends 24" From Wall
TBKT-BN	Track Bracket-Extends 24" From Wall
TBKT-DB	Track Bracket-Extends 24" From Wall
TBKT-WT	Track Bracket-Extends 24" From Wall

Track accommodates line or low voltage heads. Quick connect transformers allow fixtures from the Quick Connect system to be used. Select from any Track Head or Quick Connect Track Head.

TBKT Track Suspension Bracket supports track and fixtures. Extends 24" from wall. Use two per 4-foot Length, three per 8-foot Length.

TBKT: Brushed Nickel, Dark Bronze, Black or White

Power Feed

WAC Lighting 2-Circuit Track Live End Connector

WAC 2-Circuit Track Live End Connector on Amazon

Used for direct wiring from conduit through the ceiling

J2LE - J Track

J2-LE-BK	J Series (Juno compatible) 2 Circuit Live End
J2-LE-WT	J Series (Juno compatible) 2 Circuit Live End

WAC Lighting 2-Circuit Track Live End BX Connector

WAC Lighting 2-Circuit Track Live End BX Connector on Amazon

Live end connector, use with surface mounted BX or non-metallic sheathed cable
Also provides through the ceiling connection

J2BXLE- J Track

J2-BXLE-BK	J Series (Juno compatible) 2 Circuit Bx Live End
J2-BXLE-WT	J Series (Juno compatible) 2 Circuit Bx Live End

WAC Lighting 2-Circuit Track "I" Power Connector for Track Lighting

WAC Lighting 2-Circuit Track "I" Connector on Amazon

Power entry point at the connection of two tracks

J2 Track

J2-I-BK	J Series (Juno compatible) 2 Circuit I Joiner
J2-I-WT	J Series (Juno compatible) 2 Circuit I Joiner

WAC Lighting 2-Circuit Track Power Feed "T" Connector

WAC Lighting 2-Circuit Track "T" Connector on Amazon

Joins three track sections in a "T" configuration
Power feedable on H and J only
T connector with opposite polarity can be custom ordered.

J2 Track

J2-T-BK	J Series (Juno compatible) 2 Circuit T Joiner
J2-T-WT	J Series (Juno compatible) 2 Circuit T Joiner

WAC Lighting 2-Circuit Track Lighting J2-UCP Octagon Box Cover

WAC Lighting 2-Circuit Track Cover for Octagon Box on Amazon

J2-UCP-BK	J Series (Juno compatible) 2 Circuit Canopy Cover
J2-UCP-WT	J Series (Juno compatible) 2 Circuit Canopy Cover

Octagon box cover, used with J2-IPWR, J2-LE, J2-LRIGHT, J2-LLEFT, J2-T and J2-X for octagon box feed

WAC Lighting 2-Circuit Track J2-TBLE T-Bar End Feed

WAC Lighting 2-Circuit Track T-Bar End Feed on Amazon

J2-TBLE-BK	J Series (Juno compatible) 2 Circuit T-Bar Live End
J2-TBLE-WT	J Series (Juno compatible) 2 Circuit T-Bar Live End

Feeds track from above when T-Bar is directly above track

WAC Lighting JCLIP 2-Circuit Track Conversion Clip

JCLIP

J Series (Juno compatible) 2 Circuit Conversion Clip

Locks connectors into 2 circuit mode
Order one for each luminaire on second circuit
For use with J system 2-circuit track only

J2-T4 includes 3 JCLIP adapters, J2-T8 includes 6 JCLIP adapters, J2-T12 includes 9 JCLIP adapters

Accessories

WAC Lighting Low Voltage Track Fixture Extension

WAC Lighting Extension Rods for Low Voltage Track Heads on Amazon

X6	6"
X12	12"
X18	18"
X24	24"
X36	36"
X48	48"

Extends J- and J2-system track fixtures. Available as complete, factory-assembled unit only – specify Extension, fixture & finish (ie. X18-JHT-809-WT).
Shipped as two 36" rods with XI threaded coupler to be joined in the field.
Shipped as two 48" rods with XI threaded coupler to be joined in the field.
Lengths longer than 96" not recommended as a voltage drop may occur.

Fixtures

WAC Lighting Track Collection

WAC Lighting's extensive track collection includes hundreds of different models. Whether you are looking for a fixture that has a certain style or fixture that is suited for a specific task, WAC Lighting has the ideal choice. The extensive collection of track fixtures is available in a wide range of designer finishes and lamping options.

WAC Lighting Track Lighting with Low Voltage Track Heads

WAC Lighting Low Voltage Track Heads are a stylish and versatile choice for your lighting needs. Ideal for residential, and hospitality applications, a wide variety of choices are vailable in Bronze, Platinum, Brushed Nickel, Black or White finishes. - Five year warranty

WAC Lighting Low Voltage Track Heads >
WAC Shades, Shields, Lenses & Accessories >

WAC Lighting Track Lighting with Line Voltage Track Heads

Ideal for or display applications, WAC Lighting Line Voltage Track Heads come in a variety of lamp sizes and styles. Models are available in single circuit Halo or Halo compatible, Juno or Juno compatible or Lightolier or Lightolier compatible. 2 circuit track is available in Juno compatible. They may be compatible to fit on existing track installations. - Five year warranty

WAC Lighting Line Voltage Track Heads >

WAC Lighting Track Lighting with Metal Halide & HID Track Heads

WAC Lighting Metal Halide & HID Track Heads feature a choice of electronic ballasts for superior power regulation for significant energy savings and longer lamp life. High CRI PAR metal halide lamps puts out an amazing amount of light. A variety of beam spreads for effects from spot to wide flood. The energy efficient choice for highlighting merchandise or architectural details in a commercial or residential application. - Five year warranty

WAC Lighting Metal Halide & HID Track Heads >

WAC Lighting LED Track Lighting

WAC Lighting LED Track Heads next generation accent and display lighting fixtures, LEDme Track Lights are thermally energy efficient, long lasting and deliver a strong light output with a color temperature similar to incandescent lamping. These fixtures are perfect for effective displays, high-end residential accent lighting and displays in museums, hotels and restaurants. High quality LEDs offer beams free of projected heat and ultraviolet radiation. Perfect for colored or heat sensitive merchandise such as perishables, apparel or artwork. - Five year warranty

WAC Lighting LED Track Heads >

Quick Connect Track Heads

WAC Quick Connect Heads for Track Lighting

Wac Lighting Quick Connect Heads can be used on Halo, Juno, Lightolier or other popular 120 volt track lighting systems using a track adapter.

WAC Lighting Quick Connect Fixtures & LED Fixtures >

WAC Lighting Quick Connect Fixtures for Track Lighting

WAC Lighting Track Lighting Quick Connect on Amazon

EN-HQ50AR Halo^® compatible
EN-JQ50AR Juno^® compatible
EN-LQ50AR Lightolier^® compatible

WAC Lighting's Quick Connect collection of fixtures can be used with any standard Track Systems using a WAC Lighting Quick Connect Track Adapter.

Easily connect the metal fitting into the track lighting adapter, tighten and snap into any popular track lighting system.

Modern styles, decorative yet functional. The Quick Connect Series of low voltage track heads includes a selection of 12 styles and a wide variety glass and metal shielding options.

All Quick Connect track head stems are available with standard stem lengths from 3" to 12" so they can be low profile or closer to the action.

Quick Connect fixtures all have a male adapter. With the appropriate adapter, they can be mounted on a variety of track, rail and surface mount systems.

WAC Lighting Quick Connect Fixtures & LED Fixtures >

Line Voltage Track Pendants

WAC Lighting Line Voltage Track Pendants

These line voltage pendants can be plugged directly into Halo, Juno, Lightolier or other popular 120 volt track lighting systems without the need for an adapter.

Available in white, amber or blue mouth blown, etched and cased glass or Brushed Nickel, Copper Bronze finish metal. These pendants can use any Medium base .

WAC Lighting Line Voltage Track Pendants >

Pendant Adapter

WAC Track Suspension Loop

WAC Halo, Juno and Lightolier compatible Track Suspension Loops on Amazon

H-LOOP Halo® compatible
J-LOOP Juno® compatible
L-LOOP Lightolier® compatible

Hang any chain hung fixture from new or existing track.

3-inch electrical loop accepts chain hung fixtures, 35 pounds maximum.

H H-LOOP 3"
J J-LOOP 3"
L L-LOOP 3"

Finish: Black, Dark Bronze, Brushed Nickel or White

Halo^® compatible	Juno^® compatible	Lightolier^® compatible
H-LOOP-BK	J-LOOP-BK	L-LOOP-BK
H-LOOP-BN	J-LOOP-BN	L-LOOP-BN
H-LOOP-WT	J-LOOP-WT	L-LOOP-WT
H-LOOP-DB

Quick Connect Pendants for Track Lighting

WAC Quick Connect Pendants for Track Lighting

Wac Lighting Quick Connect Pendants can be used on Halo, Juno, Lightolier or other popular 120 volt track lighting systems using a track adapter.

WAC Lighting Artisan Pendants

This unique collection includes iridescent pendants with hand painted backgrounds in blue, green, rose and gold. The Brittany and Mini Brittany have layers of classic Italian opaline glass crafted into dramatic opalescent flowers in gorgeous hues of amber, gold and milky blue come. The Rococo pendant has beautiful mouth blown art glass hand crafted by fine Italian artisans with amber and opal frit, richly layered in speckles of gold.

Artisan Pendants >

WAC Lighting Contemporary Pendants

These sophisticated mouth blown, cased glass pendants create a soft glow. Choose from a variety of shapes and colors. The unique Micha pendant is hand crafted from pieces of crushed glass. No two pendants are identical with unique patterns and textures.

Contemporary Pendants >

WAC Lighting European Pendants

Crafted by some of the world's most highly skilled artisans, these pendants feature dichroic art glass, colored glass, unique iridescent glass, murrine glass and other glass in a variety of shapes, colors and patterns.

European Pendants >

WAC Lighting Early Electric Collection
Nostalgic design transformed beautifully into energy efficient LED pendants

Pendants Light your entire kitchen with less than 100 watts of energy. The industrial look of yesteryear with well-proportioned design. These vintage stylee incorporates exposed hardware in a glare-free miniaturized LED versions in beautiful finishes. Using just 5 watts of energy, these nostalgic pendants provide warm illumination but are cool to the touch.

Early Electric Pendants >

WAC Lighting Eternity Jewelry Collection
A modern twist on crystal

Breathtaking clusters of sparkle and brilliance. A myriad of glistening crystals add an exquisite touch to the most sophisticated decor. Modern lights developed with proprietary LED technology and old world artisanship. These elegant pendants add more than just ambiance providing generous light sufficient for tasks.

Eternity Jewelry Collection >

WAC Lighting Quick Connect Pendants for Track Lighting

WAC Lighting Track Lighting Quick Connect on Amazon

EN-HQ50AR Halo^® compatible
EN-JQ50AR Juno^® compatible
EN-LQ50AR Lightolier^® compatible

WAC Lighting's Quick Connect collection of pendants a features hundreds of hand blown glass designs. Low voltage pendants include a selection of hundreds of individual styles and colors of glass. Fine glass shades are sourced from leading factories around the world including Germany, Italy, Eastern Europe, Asia and the American Pacific Northwest.

New LEDme Quick Connect Pendants bring a clean, modern look to both commercial and residential settings. These stylish pendants are exclusively designed using the latest energy efficient technology and provide a strong and consistent light source. The evolutionary design and sleek, Compact size results in a stunning decorative accent.

The threaded male adapter used on WAC Lighting Quick Connect fixtures makes inter-system compatibility a snap. Simply insert the metal fitting into the appropriate system adapter, hand tighten the threaded collar and you are done!

WAC Lighting Quick Connect Pendants for Track Lighting EN-HQ50AR Halo® compatible on Amazon

WAC Lighting European Collection Pendants