WAC Lighting Shades, Shields, Lenses & Accessories

WAC MBS-16 Mesh Bulb Shield

MBS-16-BK Black
MBS-16-BN Brushed Nickel
MBS-16-WT White

Snaps over bulb to reduce glare from back of bulb.

• Easily snaps over lamp
• MBS-16 Used With MR16

Finish: BK-Black, BN-Brushed Nickel, WT-White

WAC SBS-16 Solid Bulb Shield

SBS-16-BK Black
SBS-16-BN Brushed Nickel
SBS-16-WT White

Snaps over bulb to eliminate glare from back of bulb.

• Easily snaps over lamp
• SBS-16 Used With MR16

Finish: BK-Black, BN-Brushed Nickel, WT-White

WAC Mesh Shield G115

Mesh Bulb Shield

Finish DB-Dark Bronze, CH-Chrome, PT-Platinum
Length 1.75" wide 2.25"

WAC Solid Shield G116

Solid Bulb Shield.

Finish DB-Dark Bronze, CH-Chrome, PT-Platinum
Length 1.75" wide 2.25"

WAC Lighting LENS- Colored Lenses

Colored Lens
Changes color of the light.
Replaces the clear lens supplied with MR16 and MR11 track fixtures. Adds dramatic effect.

Color: AMB-Amber, BLU-Blue, GRN-Green, RED-Red, YEL-Yellow

WAC Lighting DIC- Dichroic Color Lenses

Dichroic Lens
Changes color of the light.
Dichroic Lenses have superior optical clarity for pure, consistent color that resists heat and will not fade.

Color: DIC-AMB-Amber Dichroic, DIC-BLU-Blue Dichroic, DIC-GRN-Green Dichroic, DIC-RED-Red Dichroic, DIC-YEL-Yellow Dichroic

WAC Lighting LENS-FR Frosted Lenses

Frosted Lens
Softens light and reduces glare

Color: FR-Frosted

WAC Lighting LENS-CL Clear Lenses

Clear Lens

Color: CL-Clear

WAC Lighting LENS-BEL Beam Elongating Lenses

Beam Elongating Lens
Creates a horizontal or vertical strip of elongated light

Effect: BEL-Beam Elongating

WAC Lighting LENS-SPR Spread Lenses

Spread Lens
Spreads light in an even pattern

Effect: SPR-Spread

WAC Lighting LENS-UVF UV Filter Lenses

UV Filter lens
Filters out Ultraviolet light

Effect: UVF-UV Filter

WAC Lighting LENS-16-CLIP Lens Clip For MR16 Fixtures

WAC Lighting -HLD Lens Holder For Par Lamps   

WAC Lighting LENS-CRL Cross Louver

Cross Louver
Controls spill light and glare; 45° cutoff

Effect: CRL-Cross Louver

WAC Lighting LENS-HCL Honeycomb Louver

Honeycomb Louver
Reduces glare at a 30° angle

Effect: HCL-Honeycomb Louver

WAC Lighting LENS-SNOOT Snoot

Snoot
Controls spill light and glare

Effect: SNOOT- Snoot

WAC PAR Barndoor Accessories

Barn Door Line Voltage Track Light Accessory

• Metal construction
• Use to control glare for optimal lighting
• Two retention springs for easy installation
• For use with models 024, 048, 178 and 188

WAC Barn Door Accessory for LED and Low Voltage Track Light Accessory

• Metal construction
• Use to control glare for optimal lighting
• Easy to install
• For use with models LED810, LED820 and 801

Finish: BK - Black, DB - Dark Bronze, WT - White

WAC Glass Shade G111

Acid Etched Translucent Press Molded Bell

Finish AM-Amber, BL-Blue, WT-White
Length 1.75" wide 2.25"

WAC Glass Shade G112

Acid Etched Translucent Press Molded Grooved Cylinder

Finish AM-Amber, BL-Blue, WT-White
Length 1.75" wide 2.5"

WAC Glass Shade G113

Acid Etched Translucent Press Molded Ring

Finish AM-Amber, BL-Blue, WT-White
Length 1.875" wide 3 3/8"

WAC Glass Shade G114

Acid Etched Cased Glass Deep Bell

Finish AM-Amber, BL-Blue, GR-Green, RD-Red, WT-White
Length 2.5" wide 2 5/8"

WAC Lighting Low Voltage Track Fixture Extension

• Extends J- and J2-system track fixtures. Available as complete, factory-assembled unit only – specify Extension, fixture & finish (ie. X18-JHT-809-WT).
• Shipped as two 36" rods with XI threaded coupler to be joined in the field.
• Shipped as two 48" rods with XI threaded coupler to be joined in the field.
• Lengths longer than 96" not recommended as a voltage drop may occur.

WAC H18, H24, H36 or H48 Line Voltage Track Head Extension

Extends H System HTK (Halo or Halo compatible) line voltage track heads. Contact us for Lightolier or Juno availability.
This Extension stem clips onto any Halo or Halo compatible track head, then clips to the track.