Recessed Lighting
Mini Recessed & Pucks Mini Recessed Recessed WAC Lighting
WAC Tape Light WAC Quick Connect Customizable Sconces, Fixtures & Pendants

WAC Lighting 4" Recessed with Invisible Trim

Kitchen with WAC Lighting HR-LED451TL 4" Square LED recessed lighting
with Invisible Trim and Open Reflector

HR-LED451 BK/WT

WAC LEDme Downlight HR-LED451 Square, Reflector

4" Open Reflector - Square LED451TL Invisible Trim™
Square recessed trim with interior open reflector. Designed to sit flush with the ceiling for a clean, architectural look. For use with HR-LED418 Invisible Trim™ series housings.

  • Die-cast aluminum construction
  • Abrasion resistant powder coat paint or plated metal finish
  • Super low profile, less than .125" thick
  • Narrow flood beam spread
  • Deep regression of light source allows for very low glare with a 40° visual cutoff angle
  • Recessed depth from LEDs to trim edge is 2 3/8"
  • 4" Housing required - order separately

LEDs included with housing. Order separately.
Finish-Baffle/Trim: BK/BN - Black/Brushed Nickel, BK/WT - Black/White, WT/WT - White/White

HR-LED451-BK/BN 4" LED Downlight Trim Square
HR-LED451-BK/WT 4" LED Downlight Trim Square
HR-LED451-WT/WT 4" LED Downlight Trim Square

• Flush mount, no profile die-cast aluminum trim
• Recessed depth from LEDs to trim edge is 2 3/8"
• Narrow flood beam spread
• Deep regression produces a very low glare with 40° cut-off angle
• Handles surfaces up to w" thick
• 5 year WAC Lighting product warranty

Construction: Durable die-cast aluminum construction.
Three heavy gauge retention clips firmly hold trim to housing.
Utilizes six 3W LED's (included with housing).
See individual housing for wattage rating.

Finish: Powder coat paint or plated metal finish.
Available in White baffle w/White trim (WT/WT).
Standards: UL & CUL Listed.

 

LEDme 4" Downlights with Invisible Trim

HR-LED411TL BK/BN

WAC LEDme Downlight HR-LED411TL Round, Reflector with Invisible Trim

4" Open Reflector - Round LED411
Round recessed trim with interior open reflector. Designed to sit flush with the ceiling for a clean, architectural look. For use with HR-LED418 Invisible Trim™ series housings.

  • Die-cast aluminum construction
  • Abrasion resistant powder coat paint or plated metal finish
  • Super low profile, less than .125" thick
  • Narrow flood beam spread
  • Deep regression of light source allows for very low glare with a 40° visual cutoff angle
  • Recessed depth from LEDs to trim edge is 2 3/8"
  • 4" Housing required, order separately

LEDs included with housing. Order separately.
Finish-Reflector/Trim: WT/WT-White/White

HR-LED411TL-WT/WT 4" LED Downlight Trim Invisible Trim Round

• Flush mount, no profile die-cast aluminum trim
• Recessed depth from LEDs to trim edge is 2 3/8"
• Narrow flood beam spread
• Deep regression produces a very low glare with 40° cut-off angle
• Handles surfaces up to w" thick
• 5 year WAC Lighting product warranty

Construction: Durable die-cast aluminum construction.
Three heavy gauge retention clips firmly hold trim to housing.
Utilizes six 3W LED's (included with housing).
See individual housing for wattage rating.

Finish: Powder coat paint or plated metal finish.
Available in White baffle w/White trim (WT/WT).
Standards: UL & CUL Listed.

HR-LED451TL BK/WT

WAC LEDme Downlight HR-LED451TL Square, Reflector with Invisible Trim

4" Open Reflector - Square LED451TL Invisible Trim™
Square recessed trim with interior open reflector. Designed to sit flush with the ceiling for a clean, architectural look. For use with HR-LED418 Invisible Trim™ series housings.

  • Die-cast aluminum construction
  • Abrasion resistant powder coat paint or plated metal finish
  • Super low profile, less than .125" thick
  • Narrow flood beam spread
  • Deep regression of light source allows for very low glare with a 40° visual cutoff angle
  • Recessed depth from LEDs to trim edge is 2 3/8"
  • 4" Housing required - order separately

LEDs included with housing. Order separately.
Finish-Baffle/Trim: BK/BN - Black/Brushed Nickel, BK/WT - Black/White, WT/WT - White/White

HR-LED451TL-WT/WT 4" LED Downlight Trim Invisible Trim Square

• Flush mount, no profile die-cast aluminum trim
• Recessed depth from LEDs to trim edge is 2 3/8"
• Narrow flood beam spread
• Deep regression produces a very low glare with 40° cut-off angle
• Handles surfaces up to w" thick
• 5 year WAC Lighting product warranty

Construction: Durable die-cast aluminum construction.
Three heavy gauge retention clips firmly hold trim to housing.
Utilizes six 3W LED's (included with housing).
See individual housing for wattage rating.

Finish: Powder coat paint or plated metal finish.
Available in White baffle w/White trim (WT/WT).
Standards: UL & CUL Listed.

LEDme Housings for Visible Trim

WAC HR-LED418-R, HR-LED418-RIC LEDme 4" Remodel Housing

4" LEDme® Remodel Housing
4 inch LEDme® IC-Rated remodel housing, includes six 3W LED's. For use with LEDme® 4 inch trims.

  • Cutout: 4 3/8"
  • Full scale dimming to 10%
  • Smooth and continuous dimming with Electronic Low Voltage (ELV) dimmer
  • Potential life of up to 100,000 hours
  • Replaceable LED module
  • ANSI compliant Warm/Neutral LEDs for the finest color consistency possible
  • IC-Rated: Suitable for direct contact with insulation
  • Non-IC: 3" clearance on all sides when insulation is present
  • UL and CUL Listed
  • Accommodates ceiling thickness of up to 1"

HR-LED418-R
Non-IC, Remodel Housing

HR-LED418-R-27 LEDme 4" Recessed Downlight - Remodel - Non-Ic Housing - 2700K
HR-LED418-R-W LEDme 4" Recessed Downlight - Remodel - Non-Ic Housing - 3000K
HR-LED418-R-35 LEDme 4" Recessed Downlight - Remodel - Non-Ic Housing - 3500K
HR-LED418-R-C LEDme 4" Recessed Downlight - Remodel - Non-Ic Housing - 4500K

HR-LED418-RIC
IC-Rated, Remodel Housing

HR-LED418-RIC-27 LEDme 4" Recessed Downlight - Remodel - IC-Rated Housing - 2700K
HR-LED418-RIC-W LEDme 4" Recessed Downlight - Remodel - IC-Rated Housing - 3000K
HR-LED418-RIC-35 LEDme 4" Recessed Downlight - Remodel - IC-Rated Housing - 3500K
HR-LED418-RIC-C LEDme 4" Recessed Downlight - Remodel - IC-Rated Housing - 4500K

Trims: HR-LED411,HR-LED421, HR-LED431, HR-LED451, HR-LED471
Lumens: IC-Rated: 639Lm (2700K, 3000K), 681Lm (3500K), 768Lm (4500K)
Non-IC Rated: 846Lm (2700K, 3000K), 901Lm (3500K), 1003Lm (4500K)

• Cutout: 4a"
• 100,000 hour rated life
• Accommodates ceiling thickness up to 1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum heat sink painted black.
Housing and junction box are 20 gauge steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 10.2W output, 450mA current. Power factor >0.9. Dimming with thermal protection.
Includes six 3W ANSI compliant Warm/Neutral LEDs for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Mounting: Three heavy gauge inner retention clips push out onto ceiling or other mounting surface to firmly hold housing in place.
Accommodates surface up to 1" thick. 4 3/8" cutout hole.
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.

See more choices on a desktop computer or by turning your screen horizontal.

WAC LEDme HR-LED418 4" New Construction Housing

4" LEDme® New Construction Housing

  • Cutout: 4 3/8"
  • Full scale dimming to 10%
  • Smooth and continuous dimming with Electronic Low Voltage (ELV) dimmer
  • Potential life of up to 100,000 hours
  • Replaceable LED module
  • ANSI compliant Warm/Neutral LEDs for the finest color consistency possible
  • IC-Rated: Suitable for direct contact with insulation
  • Non-IC: 3" clearance on all sides when insulation is present
  • Rated for branch wiring
  • UL and CUL Listed
  • Accommodates ceiling thickness of up to 1"

HR-LED418-N-Non-IC
Non-IC, New Construction Housing

HR-LED418-N-27 LEDme 4" Recessed Downlight - New Construction - Non-Ic Housing - 2700K
HR-LED418-N-W LEDme 4" Recessed Downlight - New Construction - Non-Ic Housing - 3000K
HR-LED418-N-35 LEDme 4" Recessed Downlight - New Construction - Non-Ic Housing - 3500K
HR-LED418-N-C LEDme 4" Recessed Downlight - New Construction - Non-Ic Housing - 4500K

HR-LED418-NIC
IC-Rated, New Construction Housing

HR-LED418-NIC-27 LEDme 4" Recessed Downlight - New Construction - IC-Rated Housing - 2700K
HR-LED418-NIC-W LEDme 4" Recessed Downlight - New Construction - IC-Rated Housing - 3000K
HR-LED418-NIC-35 LEDme 4" Recessed Downlight - New Construction - IC-Rated Housing - 3500K
HR-LED418-NIC-C LEDme 4" Recessed Downlight - New Construction - IC-Rated Housing - 4500K

HR-LED418-N-EM
Emergency Backup Battery
Non-IC, New Construction Housing

HR-LED418-N-27-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction - Non-Ic Housing - 2700K
HR-LED418-N-W-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction - Non-Ic Housing - 3000K
HR-LED418-N-35-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction - Non-Ic Housing - 3500K
HR-LED418-N-C-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction - Non-Ic Housing - 4500K

Trims: HR-LED411,HR-LED421,HR-LED431,HR-LED451,HR-LED471
Lumens: IC-Rated: 639Lm (2700K, 3000K), 681Lm (3500K), 768Lm (4500K)
Non-IC Rated: 846Lm (2700K, 3000K), 901Lm (3500K), 1003Lm (4500K)

• Cutout: 4a"
• 100,000 hour rated life
• Accommodates ceiling thickness up to 1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum heat sink painted black.
Housing and junction box are 20 gauge steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 10.2W output, 450mA current. Power factor >0.9. Dimming with thermal protection.
Includes six 3W ANSI compliant Warm/Neutral LEDs for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Mounting: Three heavy gauge inner retention clips push out onto ceiling or other mounting surface to firmly hold housing in place.
Accommodates surface up to 1" thick. 4 3/8" cutout hole.
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.

See more choices on a desktop computer or by turning your screen horizontal.

LEDme Housings for Round Invisible Trim

WAC HR-LED418-R-RO, HR-LED418-RIC-RO LEDme 4" Remodel Round Invisible Trim Housing

4" LEDme® Remodel Round Housing for Invisible Trim™
4 inch LEDme® Invisible Trim™ IC-Rated remodel housing, includes six 3W LED's. Includes spackle ring to permit a stable finished installation with a drywall ceiling. For use with LEDme® 4 inch round Invisible Trims™.

  • Trims recess into housings flush to the ceiling for the cleanest looking recessed lighting installation possible
  • Housings include a spackle ring to permit a stable finished installation within a drywall ceiling
  • Cutout: 4 3/8"
  • Full scale dimming to 10%
  • Smooth and continous dimming with Electronic Low Voltage (ELV) dimmer
  • Potential life of up to 100,000 hours
  • Replaceable LED module
  • ANSI compliant Warm/Neutral LEDs for the finest color consistency possible
  • IC-Rated: Suitable for direct contact with insulation
  • Non-IC: 3" clearance on all sides when insulation is present
  • Rated for branch wiring
  • UL and CUL Listed
  • Accommodates ceiling thickness of up to 1"

HR-LED418-R-RO
Non-IC, Remodel Housing, Round, Trimless

HR-LED418-R-RO27 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - Non-Ic Housing - 2700K
HR-LED418-R-ROW LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - Non-Ic Housing - 3000K
HR-LED418-R-RO35 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - Non-Ic Housing - 3500K
HR-LED418-R-ROC LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - Non-Ic Housing - 4500K

HR-LED418-RIC-RO
IC-Rated, Remodel Housing, Round, Trimless

HR-LED418-RIC-RO27 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - IC-Rated Housing - 2700K
HR-LED418-RIC-ROW LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - IC-Rated Housing - 3000K
HR-LED418-RIC-RO35 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - IC-Rated Housing - 3500K
HR-LED418-RIC-ROC LEDme 4" Recessed Downlight - Remodel Invisible Trim (Round) - IC-Rated Housing - 4500K

Lumens: IC-Rated: 639Lm (2700K, 3000K), 681Lm (3500K), 768Lm (4500K)
Non-IC Rated: 846Lm (2700K, 3000K), 901Lm (3500K), 1003Lm (4500K)

• Cutout: 4a"
• Trims recess into housings flush to the ceiling
• 100,000 hour rated life
• Accommodates ceiling thickness up to 1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum heat sink painted black.
Housing and junction box are 20 gauge steel. Frame, hanger bars and spackle trim are heavy gauge galvanized steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 10.2W output, 450mA current. Power factor >0.9. Dimming with thermal protection.
Includes six 3W ANSI compliant Warm/Neutral LEDs for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Mounting: Three heavy gauge inner retention clips push out onto ceiling or other mounting surface to firmly hold housing in place.
Accommodates surface up to 1" thick. 4 3/8" cutout hole.
See instruction sheet for details on installation using spackle ring.
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.

See more choices on a desktop computer or by turning your screen horizontal.

WAC HR-LED418-N-RO, HR-LED418-NIC-RO LEDme 4" New Construction Round Invisible Trim Housing

4" LEDme® New Construction - Round Housing for Invisible Trim™
4 inch LEDme® Invisible Trim™ IC-Rated new construction housing, includes six 3W LED's. Includes spackle ring to permit a stable finished installation with a drywall ceiling. For use with LEDme® 4 inch round Invisible Trims™.

  • Trims recess into housings flush to the ceiling for the cleanest looking recessed lighting installation possible
  • Housings include a spackle ring to permit a stable finished installation within a drywall ceiling
  • Cutout: 4 3/8"
  • Full scale dimming to 10%
  • Smooth and continous dimming with Electronic Low Voltage (ELV) dimmer
  • Potential life of up to 100,000 hours
  • Replaceable LED module
  • ANSI compliant Warm/Neutral LEDs for the finest color consistency possible
  • IC-Rated: Suitable for direct contact with insulation
  • Non-IC: 3" clearance on all sides when insulation is present
  • Rated for branch wiring
  • UL and CUL Listed
  • Accommodates ceiling thickness of up to 1"

HR-LED418-N-RO
Non-IC, New Construction Housing, Round, Trimless

HR-LED418-N-RO27 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - Non-Ic Housing - 2700K
HR-LED418-N-ROW LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - Non-Ic Housing - 3000K
HR-LED418-N-RO35 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - Non-Ic Housing - 3500K
HR-LED418-N-ROC LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - Non-Ic Housing - 4500K

HR-LED418-NIC-RO
IC-Rated, New Construction Housing, Round, Trimless

HR-LED418-NIC-RO27 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - IC-Rated Housing - 2700K
HR-LED418-NIC-ROW LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - IC-Rated Housing - 3000K
HR-LED418-NIC-RO35 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - IC-Rated Housing - 3500K
HR-LED418-NIC-ROC LEDme 4" Recessed Downlight - New Construction Invisible Trim (Round) - IC-Rated Housing - 4500K

HR-LED418-N-RO-EM
Emergency Backup Battery
Non-IC, New Construction Housing, Round, Trimless

HR-LED418-N-RO27EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Round) - Non-Ic Housing - 2700K
HR-LED418-N-RO35EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Round) - Non-Ic Housing - 3500K
HR-LED418-N-ROC-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Round) - Non-Ic Housing - 4500K
HR-LED418-N-ROW-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Round) - Non-Ic Housing - 3000K

• Cutout: 4a"
• Trims recess into housings flush to the ceiling
• 100,000 hour rated life
• Accommodates ceiling thickness up to 1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum heat sink painted black.
Housing and junction box are 20 gauge steel. Frame, hanger bars and spackle trim are heavy gauge galvanized steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 10.2W output, 450mA current. Power factor >0.9. Dimming with thermal protection.
Includes six 3W ANSI compliant Warm/Neutral LEDs for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Mounting: Supplied with hanger bars, adjustable from 142"-242" to accommodate various joist construction and grid sizes. Hanger bars include a captive mounting "screw-nail" for ease of installation.
Accommodates surface up to 1" thick. 4 3/8" cutout hole.
See instruction sheet for details on installation using spackle ring.
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.

See more choices on a desktop computer or by turning your screen horizontal.

LEDme Housings for Square Invisible Trim

WAC HR-LED418-R-SQ, HR-LED418-RIC-SQ LEDme 4" Remodel Square Invisible Trim Housing

4" LEDme® Remodel Square Housing for Invisible Trim™
4 inch LEDme® Invisible Trim™ IC-Rated remodel housing, includes six 3W LED's. Includes spackle ring to permit a stable finished installation with a drywall ceiling. For use with LEDme® 4 inch square Invisible Trim™.

  • Trims recess into housings flush to the ceiling for the cleanest looking recessed lighting installation possible
  • Housings include a spackle ring to permit a stable finished installation within a drywall ceiling
  • Cutout: 4 3/8"
  • Full scale dimming to 10%
  • Smooth and continous dimming with Electronic Low Voltage (ELV) dimmer
  • Potential life of up to 100,000 hours
  • Replaceable LED module
  • ANSI compliant Warm/Neutral LEDs for the finest color consistency possible
  • IC-Rated: Suitable for direct contact with insulation
  • Non-IC: 3" clearance on all sides when insulation is present
  • Rated for branch wiring
  • UL and CUL Listed
  • Accommodates ceiling thickness of up to 1"

HR-LED418-R-SQ
Non-IC, Remodel Housing, Square, Trimless

HR-LED418-R-SQ27 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - Non-Ic Housing - 2700K
HR-LED418-R-SQW LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - Non-Ic Housing - 3000K
HR-LED418-R-SQ35 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - Non-Ic Housing - 3500K
HR-LED418-R-SQC LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - Non-Ic Housing - 4500K

HR-LED418-RIC-SQ
IC-Rated, Remodel Housing, Square, Trimless

HR-LED418-RIC-SQ27 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - IC-Rated Housing - 2700K
HR-LED418-RIC-SQ35 LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - IC-Rated Housing - 3500K
HR-LED418-RIC-SQC LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - IC-Rated Housing - 4500K
HR-LED418-RIC-SQW LEDme 4" Recessed Downlight - Remodel Invisible Trim (Square) - IC-Rated Housing - 3000K

Lumens: IC-Rated: 639Lm (2700K, 3000K), 681Lm (3500K), 768Lm (4500K)
Non-IC Rated: 846Lm (2700K, 3000K), 901Lm (3500K), 1003Lm (4500K)

• Cutout: 4a"
• Trims recess into housings flush to the ceiling
• 100,000 hour rated life
• Accommodates ceiling thickness up to 1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum heat sink painted black.
Housing and junction box are 20 gauge steel. Frame, hanger bars and spackle trim are heavy gauge galvanized steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 10.2W output, 450mA current. Power factor >0.9. Dimming with thermal protection.
Includes six 3W ANSI compliant Warm/Neutral LEDs for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Mounting: Three heavy gauge inner retention clips push out onto ceiling or other mounting surface to firmly hold housing in place.
Accommodates surface up to 1" thick. 4 3/8" cutout hole.
See instruction sheet for details on installation using spackle ring.
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.

See more choices on a desktop computer or by turning your screen horizontal.

WAC HR-LED418-N-SQ, HR-LED418-NIC-SQ LEDme 4" New Construction Square Invisible Trim Housing

4" LEDme® New Construction - Square Housing for Invisible Trim™
4 inch LEDme® Invisible Trim™ IC-Rated new construction housing, includes six 3W LED's. Includes spackle ring to permit a stable finished installation with a drywall ceiling. For use with LEDme® 4 inch square Invisible Trim™.

  • Trims recess into housings flush to the ceiling for the cleanest looking recessed lighting installation possible
  • Housings include a spackle ring to permit a stable finished installation within a drywall ceiling
  • Cutout: 4 3/8"
  • Full scale dimming to 10%
  • Smooth and continous dimming with Electronic Low Voltage (ELV) dimmer
  • Potential life of up to 100,000 hours
  • Replaceable LED module
  • ANSI compliant Warm/Neutral LEDs for the finest color consistency possible
  • IC-Rated: Suitable for direct contact with insulation
  • Non-IC: 3" clearance on all sides when insulation is present
  • Rated for branch wiring
  • UL and CUL Listed
  • Accommodates ceiling thickness of up to 1"

HR-LED418-N-SQ
Non-IC, New Construction Housing, Square, Trimless

HR-LED418-N-SQ27 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - Non-Ic Housing - 2700K
HR-LED418-N-SQW LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - Non-Ic Housing - 3000K
HR-LED418-N-SQ35 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - Non-Ic Housing - 3500K
HR-LED418-N-SQC LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - Non-Ic Housing - 4500K

HR-LED418-NIC-SQ
IC-Rated, New Construction Housing, Square, Trimless

HR-LED418-NIC-SQ27 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - IC-Rated Housing - 2700K
HR-LED418-NIC-SQ35 LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - IC-Rated Housing - 3500K
HR-LED418-NIC-SQC LEDme 4" Recessed Downlight - New Construction Invisible Trim (Square) - IC-Rated Housing - 4500K
HR-LED418-NIC-SQW LEDme 4" Recessed Downlight - Remodel - Non-Ic Housing - 3000K

HR-LED418-N-SQ-EM
Emergency Backup Battery
Non-IC, New Construction Housing, Square, Trimless

HR-LED418-N-SQ27EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Square) - Non-Ic Housing - 2700K
HR-LED418-N-SQW-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Square) - Non-Ic Housing - 3000K
HR-LED418-N-SQ35EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Square) - Non-Ic Housing - 3500K
HR-LED418-N-SQC-EM LEDme 4" Recessed Downlight with Emergency Backup - New Construction Invisible Trim (Square) - Non-Ic Housing - 4500K

• Cutout: 4a"
• Trims recess into housings flush to the ceiling
• 100,000 hour rated life
• Accommodates ceiling thickness up to 1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty

Construction: Die-cast aluminum heat sink painted black.
Housing and junction box are 20 gauge steel. Frame, hanger bars and spackle trim are heavy gauge galvanized steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 10.2W output, 450mA current. Power factor >0.9. Dimming with thermal protection.
Includes six 3W ANSI compliant Warm/Neutral LEDs for the finest color consistency possible. Replacement modules available.
Dimming: May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Mounting: Supplied with hanger bars, adjustable from 142"-242" to accommodate various joist construction and grid sizes. Hanger bars include a captive mounting "screw-nail" for ease of installation.
Accommodates surface up to 1" thick. 4 3/8" cutout hole.
See instruction sheet for details on installation using spackle ring.
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.

See more choices on a desktop computer or by turning your screen horizontal.

See more choices on a desktop computer or by turning your screen horizontal.

Related Pages


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791