NSL LED Tape Light

NSL LED Tape Light

Indoor or Outdoor Installation

LEDs mounted to Flexible Printed Circuit Board with 4.3 watts per foot brightness. Minimal fixture profile of just 2.0mm (3/32") high by 10mm (12/32') wide. Can be field cut and reconnected every 4". Safe, Class 2 LED Drivers power up to 20 feet of product in a single run. Dimmable. Easy mounting with 3M tape pre-applied to back of fixture. Offered in six LED colors and RGB colour change for dramatic effects! Our extrusions are ideal for recessed or in cabinet applications.

CW = Cool White
NW= Neutral White
WW = Warm White

Specifications:

Low Power 

  • Power Consumption: 2.2 Watts per foot
  • Lumen Output:
    • 165 Lumens per foot - CW
    • 150 Lumens per foot - NW
    • 145 Lumens per foot - WW
  • Lumen Laintenance: 50,000 Hours
  • CRI: >80

High Power 

  • Power Consumption: 4.3 Watts per foot
  • Lumen Output:
    • 325 Lumens per foot - CW
    • 300 Lumens per foot - NW
    • 285 Lumens per foot - WW
  • Lumen Laintenance: 50,000 Hours
  • CRI: >80

NSL LED Tape Light Accessories

LTP-001-6R
72" Power feed connector for single color indoor. Add "-L" to code for opposite end, add "-CM" for through wall connections.

LTP-001-12R
12FT Power Feed Connector.



LTP-002
In-line connector for single color indoor.



LTP-TBC
Terminal block connector for power feed and in-line connections



LTP-STP-2IN
2" (5cm)

LTP-STP-6IN
5.9" (15cm)

LTP-STP-2
2' (61cm)

LTP-STP-12
12' (3.65m)

In-line connector for single color indoor.



LMSII-001
Terminal block and junction box for connection to additional lengths of power cable if needed.



LTP-010-S
Clear PVC mounting "U" channel



LTP-003-6DC
DC connector for LED Tape Light with 6" wire and DC connector



LV-SPIR-1CH-LV
PIR Motion Sensor, 1 Channel, 24V DC

Indoor/Outdoor Dimmable Drivers

TRE24L40DC
Max recommended load 36W or 8' LED Tape Light,
min 8W or 2' LED Tape Light

6.77" x 2.67" x 1.26" (171 x 68 x 32mm)



TRE24L96DC
Max recommended load 90W or 20' LED Tape Light, min 8W or 2' LED Tape Light

6.77" x 2.67" x 1.26" (171 x 68 x 32mm)

Non Dimmable Drivers

LEDDR-24-120W
Indoor/Outdoor driver

Max. recommended load 90W or 20' (6.1m) per single tap, 120W or 27' (8.23m) combined two secondary taps.

120W hardwire

Input: 100 - 240V AC
Output: 24V DC

10" x 3 3/8" x 3 3/16" (254 x 85.7 x 80.9mm)

Non-dimmable Plug In Drivers

LMS-24-18W



LMS-24-60W


See more choices on a desktop computer or by turning your screen horizontal.

Related Pages


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791