WAC InvisiLED® Pro Submersible Outdoor Tape Lighting

WAC LED-TO24 Submersible Outdoor Tape Lighting
InvisiLED® Pro 24V Outdoor Tape Light System

Double insulated PVC encasement and distinct electrical and mechanical junctions allow for seemingly endless runs that can be powered separately

Power: 3.5W / ft
Lumens: Up to 220 lm / ft
CRI: 90
Rated Life: 80,000 hours

  • IP-68 rated, UL/cUL listed for wet location and submersible up to 5'
  • May be field cut every 6 inches at the end of a run
  • Maximum run length of 28ft per electrical feed

Color Temp 2700K - 90
LED-TO2427-1-WT
LED-TO2427-5-WT
LED-TO2427-10-WT
Color Temp 3000K - 90
LED-TO2430-1-WT
LED-TO2430-5-WT
LED-TO2430-10-WT
Color Temp 3500K - 90
LED-TO2435-1-WT
LED-TO2435-5-WT
LED-TO2435-10-WT

  • Delivered Lumens: 2200lm
  • 2700K, 3000K, 3500K
  • CRI: 90
  • Power: 17.5W, 3.5W, 35W
  • Input: 24 VAC/DC
  • Rated Life: 80000 Hours
  • Ultra thin profile at 1/8"
  • Diodes spaced evenly at 1" on center
  • May be field cut every 6" and at the end of a run
  • Unique tape section connections ensure even LED spacing and no dark spots
  • Transformer required
  • Can be mounted on ceiling or wall in all orientations

UL & CUL Listed for wet locations
Submersible up to 5'

Compatible Class 2 Power Supply (Required)

Damp Location

WAC Remote Damp Location Class 2 Power Supply Compatible with InvisiLED Wet Location Tape Light

InvisiLED® PRO & RGB Outdoor 96W 24V Enclosed Class 2 Electronic Transformer

EN-OD24100-RB2-T
96W 120V AC 24V AC ELV
Remote Enclosed Electronic Transformer for Outdoor PRO 120V Input 24VAC Output 96 Watt
6.5" x 1.625" x 1.125"

  • Input: 120 VAC, 50/60Hz
  • 1W minimum load
  • Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques
  • Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current be drawn
  • The enclosure is damp location listed, the waterproof connector is wet location listed
  • Compatible with InvisiLED Pro Outdoor LED-TO2435
  • Built-in auto reset, soft start, short and overload circuit

Includes a 6 foot lead wire

UL & CUL Listed for wet locations



Wet Location

WAC Remote Wet Location Class 2 Power Supply Compatible with InvisiLED Wet Location Tape Light

InvisiLED® RGB Outdoor Wet 96W 24VDC Enclosed Class 2 Power Supply

EN-O24100-RB2-T
96W 120V - 277V AC 24V DC 0-10V
Remote Enclosed Electronic Transformer for Outdoor PRO & RGB 120-277V Input 24VDC Output 96 Watt
11.4375" x 4.125" x 4.125"

  • Input: 120 VAC, 50/60Hz
  • Short circuit, over current, over voltage, over temperature protection.
  • Class 2. 1W minimum load; 96 maximum load
  • Preinstalled with 6' InvisiLED 24V lead wire . Also compatible with Straight Edge, Line, Line 2.0, HR-LED87 and HRLED90 fixture applications. 6' adapter cable included.

Includes a 6 foot lead wire

UL & CUL Listed for wet locations

Damp or Wet Location Mounting Accessories

Surface Mounting Clips

LED-TO24-C1 10 pcs 20 Screws

Secures on both edges



Edge Mounting Clips

LED-TO24-C2 10 pcs 10 Screws

Secures on one edge



Invisible Clips

LED-TO24-C3 10 pcs 10 Screws

Holds from the underside



InvisiLED Clear Channel

LED-TO24-CH5 5 feet

  • Rigid, non-flexible channel for mounting to a straight, solid surface
  • Dimension: 60" length, 5/8" width, 1/4" height
  • Can be mounted on ceiling or wall in all orientations

Compatible with Pro, Pro2, Pro3, LITE, Classic, Palette
Use indoors or outdoors damp or wet location

Damp or Wet Location Electrical Accessories

3-Way "Y" Connector

LED-TO24-Y
Y-Connector for InvisiLED 24V Outdoor Tape Light

  • Input: 24 VAC/DC
  • Connects tape sections
  • Can be mounted on ceiling or wall in all orientations


4-Way "X" Connector

LED-TO24-X
X-Connector for InvisiLED 24V Outdoor Tape Light

  • Input: 24 VAC/DC
  • Connects tape sections
  • Can be mounted on ceiling or wall in all orientations


Joiner Cable

LED-TO24-IC6 6-inches
LED-TO24-IC12 12-inches
LED-TO24-IC72 72-inches
LED-TO24-IC120 120-inches

Joiner Cable for InvisiLED 24V Outdoor Tape Light
  • Input: 24 VAC/DC
  • Extends distance between transformers and controllers for color changing applications
  • Connects 2 sections of tape for Outdoor Pro tapelight applications
  • Can be mounted on ceiling or wall in all orientations


End caps

LED-TO24-EC
End Cap for InvisiLED 24V Outdoor Tape Light

1 cut and 1 male end cap

  • Use to terminate every run to protect against contaminants.
  • Seal cut end with silicone after adding end cap.
  • Can be mounted on ceiling or wall in all orientations

See more choices on a desktop computer or by turning your screen horizontal.

Related Pages


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791