WAC Palette InvisiLED Damp Location Variable Color LED Tape Light

WAC LED-TC InvisiLED® Palette
InvisiLED® Palette 24V RGB Color Changing Tape System

Power: 1.5W / ft
Lumens: 40 lm/ft on 3500K setting
Rated Life: 50,000 hours

• Variable colors with 3500K White
• DMX and wireless controller options for Palette system
• Maximum run length of 40 feet
• May field cut every 6" at the end of a run
• Dim with wired and wireless controller
• Specially rated for installation in small or tight spaces

LED-TC-1-RGB
LED-TC-1-40-RGB
LED-TC-5-RGB

• Red, Green, Blue
• Power: 1.5W, 1.5W X 40, 7.5W
• Input: 24 VDC
• Rated Life: 50000 Hours
• Ultra thin profile at .125"
• Diodes spaced evenly at 1" on center
• DMX controller option (consult factory)
• Wireless controller available
• Select from any color to visibly change an interior design
• Run a program to change the speed and brightness
• May be field cut every 6" at the end of a run
• Transformer required
• Can be mounted on ceiling or wall in all orientations

UL & CUL Listed for damp locations

WAC InvisiLED Mounting and Wiring Accessories >

WAC InvisiLED Palette Wired Controller (required)

LED-TC-CTR-MSD

4 function wired controller with master and slave settings
Allows brightness control, preset color selection, or playing a rotation of color transitions with variable speed control

WAC InvisiLED Palette Wireless Controller (optional)

LED-TO24-WS

Wireless connection to Wired Controller
Allows brightness control, preset color selection, or playing a rotation of color transitions with variable speed control

• Input: 3V (Requires 2 AAA batteries)
• 4 function wireless controller
• Can be mounted on ceiling or wall in all orientations

4" × 2.5" × 5/8"

WAC InvisiLED Palette Signal Wire (optional)
Signal Wire for Master to Slave Controller on InvisiLED 24V RGB Color Changing Tape Light

LED-TC24-SW60 60"
LED-TC24-SW120 120"

Links master and slave controllers.
Can be combined for longer lengths.

WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light

EN-2460D-C
Remote Enclosed Power Supply for InvisiLED Color Changing
120V Input 24V DC
Output 60 watt
6.875" long x 3.3125" wide x 1.75" high

• Input: 120 VAC, 50/60Hz
• Supplies power with hard wiring 6' long lead wire included
• Requires a minimum load of 1W for consistent operation

UL & CUL Listed for damp locations

WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light

EN-2460D-C-P
Plug-in Power Supply for InvisiLED Color Changing
120V Input 24VDC
Output 60 watt
4.625" long x 2" wide x 1.1875"

• Input: 120 VAC, 50/60Hz
• Construction: Polycarbonate
• 6' long input and output wires
• Requires a minimum load of 1W for consistent operation

UL & CUL Listed for damp locations